GSi X Series Assembly

1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421
Installing the Roof Handrail Kit
1. Assemble one handrail post (11) to each side of a roof rung (10) using 5/16" x 3/4" flange bolts (2)
and 5/16" flange nuts (8).
NOTE: Install the handrail posts (11) to every other roof rung (10) starting from the eave. Make sure
the handrails posts (11) are facing away from the bin (angle open outward).
2. Install one handrail mount bracket (12) to the top of each handrail post (11) using 5/16" x 3/4" flange
bolts (2) and 5/16" flange nuts (8) as shown.
NOTE: Install the flange bolts (2) with bolt head to the inside of the walking area.
3. Starting at the eave of the roof, install the roof rungs (10) to the existing holes in the roof panel ribs
using 5/16" x 1" flange bolts (1) and 5/16" flange nuts (8).
NOTE: Make sure the rungs (10) are centered between the roof panel ribs and the flange bolts (1)
are installed with bolt head to the inside of the roof panel (50).
NOTE: If the rung (10) falls on a location where a roof ring is present, field drill holes in the roof ribs
just above the roof ring and install the rung (10) right above the roof ring.
Ref #
1 5/16"-18 x 1" Flange Bolt (S-10260)
2 5/16"-18 x 3/4" Flange Bolt (S-6606)
8 5/16"-18 Flange Nut (S-3611)
10 Roof Rung (RFS-0020-XX*)
Date: 12-20-21 V1.0
Printed in the USA
Copyright © 2021 by The GSI Group, LLC
www.gsiag.com
Figure 1 Installing the Handrail Posts and Roof Rungs
Description
X-Series Ladder, Eave Platform, Manway
Guard and Roof Handrail Assembly
Ref #
11 Handrail Post (RFS-0021)
12 Handrail Mount Bracket (WBS-0319)
50 Roof Panel
* "XX" denotes the size of the roof rungs.
PNEG-2369
Instructions
Description
PNEG-2369
Page 1 of 8
CN-400929