Advertisement
2 Installation
The installation of the Archimede is extremely easy and fast. The configuration is made by
sending SMS messages from a normal GSM phone.
2.1 Before configuration of the unit it is necessary to install it and connect the power as
well as the inputs to be monitored and the output to be controlled. If the unit is required
to send a message in the event of a power failure then a 9 Volt standard battery type
(6LR61) must be inserted.
Attention to prolong the life of the battery it is recommended that it is inserted only
after installation and programming.
2.1.1 Connection Information
The unit is easily incorporated into panels and other enclosures having a size of 35mm x
&.7.5mm to fit on any DIN EN50022 rail system alongside circuit breakers, switches or
fuses etc.
Front View
For each input two states are permitted input open or input closed.
All inputs are protected against accidental voltage up to 15V
PIN
1
Power
12Vdc ± 20% or 12Vac ± 20%
2
3
Input 1 ( + )
4
Input 1 ( - )
5
Input 2 ( + )
6
Input 2 ( - )
7
Input 3 ( + )
8
Input 3 ( - )
9
Input 4 ( + )
10
Input 4 ( - )
11
Input 5 ( + )
12
Input 5 ( - )
13
Input 6 ( + )
14
Input 6 ( - )
15
Input 7 ( + )
16
Input 7 ( - )
17
Input 8 ( + )
18
Input 8 ( - )
19
Output 1
Normally Open Contact
20
DESCRIPTION
6
Advertisement
