Page 1
VERSION 1.1 Update 02-03-2021 ECCO is made by PrimaLuceLab SpA (Italy). For any matters relating to the use, service and warranty, please refer to the addresses given in the relevant documents. P r i m a L u c e L a b S p A • V i a R o v e r e d o 2 0 / B , 3 3 1 7 0 , P o r d e n o n e w w w.
Page 2
If improperly handled, ECCO may damage. So please follow the instructions below: • Do not disassemble • Do not open, damage or subject to electric shock or excessive impact any part of ECCO. Do not drop. • Do not short the electronic elements •...
Page 3
5 of your EAGLE, you will connect the temperature sensor to the port 5 of the ECCO. • Connect the USB cable (you find in this box) in the USB port of the ECCO and in USB port of the EAGLE.
Page 4
Control Panel, then select Device Manager. Here you see the list of all the devices. Please connect ECCO’s USB cable and you will see the list updating. If the new found device has a yellow mark, it means that the driver has not automatically loaded.
Page 5
The abusive disposal of the product by the user implies the application of the administrative sanctions as per D.Lgs. 152/2006. Compliance with the RAEE legislation (D.Lgs. 49/2014) PrimaLuceLab is registered to AEE Register with number IT17030000009790 PrimaLuceLab adheres to Sistema Collettivo ERP Italia for the com- pliance to RAEE legislation. P a g e 4...
Page 6
E C C O u s e r m a n u a l WARRANTY 1) The PrimaLuceLab product warranty is effective from the date of purchase and is valid only if it is with the invoi- ce (or receipt) of purchase. ...
Need help?
Do you have a question about the ECCO and is the answer not in the manual?
Questions and answers