Table of Contents
Advertisement
5. Press
or
"DRIVE B".
6. Press
or
the area around 7th and8th scale (B) becomes pure gray with no
red or blue tint.
7. Repeat step 3 through 6 so that all the scales become pure gray
with no red or blue tint.
4.4.4.2. Fine Adjustment
1. Connect the Personal Computer to the RGB1 IN with the VGA
cable.
2. Supply 50 % White Pattern Signal and project on the screen.
3. Press
or
"CUTOFF B".
4. Adjust "CUTOFF R" or "CUTOFF B" by pressing
that color temperature(K) and its deviation (uv) at the center of the
screen are 8500 K to 10500 K (Center 9500 K), and 0.009 uv to
0.017 uv (Center 0.012 uv) respectively by Luminance Color Meter.
5. Supply 100 % White Pattern Signal and project on the screen.
6. Measure the center of the screen by Luminance Color Meter.
7. Supply 95 % White Pattern Signal and project on the screen.
button on remote control to select "DRIVE R" or
button to adjust "DRIVE R" or "DRIVE B" so that
button on remote control to select "CUTOFF R" or
Fig. 4-4-10
or
button so
Advertisement
Table of Contents
