Sharp AR-153E N Operation Manual page 34

A: Misfeed in the paper feed area
1
Gently remove the misfed paper from the paper feed area as
shown in the illustration. When the misfeed (
blinks, and the misfed paper is not seen from the paper feed
area, pull out the paper tray and remove the misfed paper. If the
paper cannot be removed, proceed to "B: Misfeed in the fusing
area".
2
Close the side cover by pressing the round projections near
the side cover open button. The misfeed (
out and the start (
B: Misfeed in the fusing area
1
Lower the fusing unit release
lever.
32
Downloaded from:
The fusing unit is hot. Do not touch the fusing unit when
removing misfed paper. Doing so may cause a burn or other
injury.
Do not touch the photoconductive drum (green portion) when
removing the misfed paper. Doing so may cause smudges on
copies.
http://www.usersmanualguide.com/
) indicator will light up.
Fusing unit release lever
) indicator
) indicator will go