Eagle Group Spec-Master 502971 Assembly Instructions

PART #333309
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
#6
#5
Before assembly:
• Determine applicable sets of holes in brackets
and in drawer enclosure.
• Please note that 20˝ x 15˝ drawers require
holes to be drilled into table channel framing.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2005 by the Eagle Group
Spec-Master
Tables with Channel Frame
(Drawers #502971 and 502972)
ASSEMBLY INSTRUCTIONS
(For Tables with Angle Frame, see Page 3)
SAVE YOUR BOX AND ALL PACKING MATERIALS.
#1
#2
#3
#2
(actual size of hardware)
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065 or 302/653-3036
Drawers for
®
CAUTION
Parts List
item qty
#1 2
#1
2
#1
#1 2
#2 4
#3
4
#3
#4 4
#5
1
#4
#6 4
* These screws are premounted to the table channel framing
(underneath tabletop), and will be used to mount drawer brackets.
#4 #6
part # description
316985 Drawer Mounting Bracket for
24˝-wide tables
or
316986 Drawer Mounting Bracket for
30˝- and 36˝-wide tables
or
316987 Drawer Mounting Bracket for
30˝-wide tables
308624 #10-24 x 1 ⁄ ˝ Screw
2
301492 #10 Lock Washer
300755 #10-24 Hex Nut
Drawer Enclosure (pan not shown)
313630* #12 x ⁄ ˝ Sheet Metal Screw
3
4
This hole sets the
drawer in further
under the table.
(continued on Page 2)
EG9825 Revised 10/05