Contents Introduction Precautions Components Replace the Base Assemble filters Flange Back Adjustment A er-sales Service The Name and Contentof Hazardous Substances...
Introduction Thank you for your purchase of this products! "KOOP" Filter series is a set of rear filters designed for DZOFILM Vespid Prime Series (PL mount). There are two suits, standard set and Artistic set. There are plenty of effects of filters to choose. Through magnetic base a ached, users can quickly replace filters and apply them on various...
Precautions Please make sure that the direction is right when you install and remove the base of filter and original base to avoid damaging filters or the lens. Do not touch the surface of lenses directly. Dirt can be cleaned by balloons and cleaning brushes.
Replace the Base 1. Disassemble the original mount base align the complimentary card wrench on the groove of the base, rotate it anticlockwise. 2. A er taking off the original base, a ach the magnetic base on lens mount and align it to the groove, tighten with card wrench clockwise.
Assemble Filters A er replacing the magnetic base, a ach the filter on the base. Filter assembling completes. Usage of DIY Bokeh Filter : A er replacing magnetic base, place the Bokeh filter evenly on the base (please do not exceed the space of base). A ach the filter frame on the top.
Flange Back Adjustment A er replacing rear filters, the distance of focusing ring might change. If flange back adjustment is needed, please refer to the following sheet. Adjust the flange back according to adding shims based on the type of filter, correct focusing distance can be regained. Reference for adding shims (a er assembling filter) Blue Streak, DIY Filter Frame...
To prevent waste, repairs or replacement may be made using refurbished parts or products, and DZOFILM may collect returned parts or products for later use. When returning a product for repair, please let us know if you need the original parts.
The Name and Content of Hazardous Substances Hazardous Substances Part Name Cr(VI) PBDE Optics Package Parts Other Parts This table is formulated in accordance of SJ/T Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the GB/T standard.
Need help?
Do you have a question about the KOOP Series and is the answer not in the manual?
Questions and answers