Advertisement
Plastic Service Carts
OWNER'S MANUAL
Item# 143210
Item# 196233
Item# 143217
Item# 143211
Item# 143213
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other
basic safety precautions may result in serious personal injury.
Advertisement
Table of Contents
Summary of Contents for Nothern Industrial tools 143210
- Page 1 Plastic Service Carts OWNER’S MANUAL Item# 143210 Item# 196233 Item# 143217 Item# 143211 Item# 143213 WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
- Page 2 DO NOT use the machine until you have first contacted the distributor to determine if it can or should be performed on the product. For technical questions please call 1-800-222-5381. TECHNICAL SPECIFICATIONS Item# Capacity Shelf Product Size Caster 143210 500 Lbs. 40-3/8"x17-1/3"x33-2/3" 5" 196233 500 Lbs. 46-7/8"x25-3/4"x33-2/3" 5" 143217 400 Lbs.
- Page 3 ASSEMBLY NOTE: Please refer to the Parts Diagram for the following assembly instructions. For 2-SHELF SERVICE CARTS, Item# 143210, 196233, 143217 1. Place one Tray (3) upside down on the work surface. Locate the Handle (5). Turn it upside down with the cup holder toward the Tray (3) and the hand holes on the outside. Using a rubber mallet, tap the Handle (5) down into the grooves on the Tray (3) - see Figure A.
- Page 4 5. Locate the second Tray and turn it upside down. Set the second Tray (3) onto the Beams (7 & 8) making certain that both Trays (3) are facing the same way. Inserts Screws (4) down through the Tray (3) into each Beam (7) and Beam (8) - see Figure C. 6.
- Page 5 down with the cup holder toward the Tray (3) and the hand holes on the outside. Using a rubber mallet, tap the Handle (5) down into the grooves on the Tray (3) - see Figure A. 2. Locate the two Beams (7). Place one on the Tray (3) corner nearest the Handle (5), and place one on the diagonal corner located on the outside of the Tray (3) as in the Assembly diagram.
- Page 6 Now your service cart is ready for use. Make sure not to exceed the product’s rated maximum load capacity. MAINTENANCE 1. BEFORE EACH USE, inspect the general condition of the service cart. Check for: • loose hardware, • misalignment or binding of parts, cracked, bent, or broken parts, and •...
- Page 7 DIAGRAM FOR 2-SHELF SERVICE CARTS, Item# 143210, 196233, 143217 DIAGRAM FOR 3-SHELF SERVICE CARTS, Item# 143211, 143213 Page of 8...
- Page 8 Parts List Description No. Description Qty No. Description Corner Cover Beam Washer Corner Cover Bracket of Caster Swivel Caster Tray, (Item# 143210, Screw 196233, 143217) Tray, (Item# 143211, 143213) Screw Caster Handle Screw Beam Bracket of Fixed Caster For replacement parts and technical questions, please call 1-800-222-5381.
Need help?
Do you have a question about the 143210 and is the answer not in the manual?
Questions and answers