iLive IAEBTNQ102 v2900-01 User Manual

Truly Wireless Noise Canceling Earbuds
User's Guide for Model IAEBTNQ102 v2900-01
Charging Contacts
• Touch and hold for 5 seconds to power ON/OFF.
• Tap to play/pause music.
• Tap to answer/end phone calls.
• Press and hold for 2 seconds to reject incoming calls.
• Quickly tap twice to skip to next track (RIGHT).
Charging Contacts
Charging the Earbuds
1. Open the cover and place the earbuds on the charging
contacts. Be sure to match the left and right earbuds
with the correct docking station in the case.
2. Earbud Indicator LEDs will turn red when charging.
When fully charged, the LEDs will turn off. Note: These
earbuds are quick charging. 20 minutes of charging gives
the earbuds 1 hour and 10 minutes of playtime.
Function Button
• Quickly tap twice to play previous tracks (LEFT).
• Press and hold for 2 seconds to activate voice assistant
(LEFT).
• Press and hold for 2 seconds to switch modes between:
Normal, Transparent and ANC (RIGHT).
Power & Battery Indicator LEDs
2
3
Charging the Case
Using a USB-C to USB cable (included),
connect to the USB port of a powered
on computer or USB power adaptor (not
included) to charge the case. When the case is
charging the Power & Battery Indicator LEDs
will flash blue. When fully charged all LEDs will
turn solid blue.
Earbud Indicator LED/Microphone
Red when charging.
Lights off when fully charged.
The 4 Blue LEDs represent the amount of battery the
case charger has.
1 LED=25%
LEDs=50%
LEDs=75%
4 LEDs=100%