Device Configuration Using Pc - XT -6300 Series Installation Manual

Device Configuration using PC

a. A RS-232 to USB TTL converter cable is required to connect a XT-63XX device to a computer for
local configuration. Serial Port # 2 is used for configuration. Connect the XT63XX Tx wire to the
TTL converter cable Rx wire. Connect the XT-63XX Rx wire to the TTL converter cable Tx wire.
Connect the XT-63XX ground wire to the ground wire of the TTL converter cable. Use a terminal
application to connect to the COM port associated with the TTL converter cable. Use the
following settings:
A. Terminal Application Settings:
a.
b.
c.
d.
e.
B. Load Script File with the following command
a.
b.
C. Load Parameter File with the following command
a.
b.
D. Save the configuration
a.
Version 1.3
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
:grscr x 2 "D_Script3_20.bin>"
Upload file with terminal program
:gycfg x 2 "Name of file"
Upload file with terminal program
:vycfg
7