Connecting An Mp3 Player Or Video Unit; Care And Maintenance - Lanzar HTG50EBTH User Manual

Connecting an MP3 player or video unit

1. Plug the MP3 player or video unit into the auxiliary RCA input on the back of
the HTG50EBTH unit.
2. Make sure the auxiliary button on the front of the unit is out, ready to receive
input from the main RCA input (not the auxiliary RCA input).
3. Turn the HTG50EBTH master volume to a normal listening level.
4. Press the play button on the auxiliary source.
5. Push in the AUX button to change to the auxiliary source.
6. Using a small athead screwdriver, adjust the AUX gain controls located on the
top of the unit so that the volume of the auxiliary source matches the volume
of the main source.
Set up Wireless BT Streaming
1. Make the device you are connecting to visible.
2. Open Settings.
3. Select BT ON.
4. Toggle the button and tap Scan to turn ON BT and scan for devices.
5. Select the device you want to connect to from list "LANZAR HERITAGE".

Care and Maintenance

Cleaning the cabinet
Use a soft, dry cloth to gently wipe dust and dirt from the unit.
Do not use benzene, thinner, car cleaner, or other cleaners. These substances may
damage the unit or cause the paint to peel.
Servicing the equalizer/crossover unit
In the event that trouble arises, never open the case or disassemble the unit.
The internal parts are not serviceable by the user. Opening any components will
void the warranty.
CAUTION!
Changes or modifications to this product that are not approved by the
manufacturer will void the warranty and will violate FCC approval.
6
www.Lanzar.com