Subscribe to Our Youtube Channel
Related Manuals for Lenoxx HACIENDA TP200
Summary of Contents for Lenoxx HACIENDA TP200
- Page 1 MODEL: TP200 BATCH: PR4462 THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY. PLEASE READ AND RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
- Page 2 The illustrations used in the manual are to illustrate the operation method and structure of the product. Where there is a small difference between the physical item and the illustrations, please take the physical as the standard. WARNING IMPORTANT – PLEASE READ! IMPORTANT - It is essential that the intended site for this trampoline is completely flat and level.
- Page 3 Care & Use This trampoline must be assembled by an adult. It must be erected exactly as detailed in the assembly instructions. Please ensure children under the age of 36 months do not play with or are given any part of this trampoline when being assembled or when complete as it contains small parts which may pose a choking hazard.
- Page 4 Jumper’s Role in Preventing Accidents Education on the part of the user is a must for safety. Users must first learn a low controlled bounce and the basic landing positions and combinations before proceeding to intermediate skills. Jumpers must understand why they have to master “control” before they can start thinking about other moves.
- Page 5 Placement IMPORTANT - It is essential that the intended site for this trampoline is completely flat and level. If the surface is un-level this will cause movement in the frame and could cause stress on the joined sections. The recommended safe use area is a minimum of 2500cm (2.5 meters) beyond the trampoline on all sides.
- Page 6 ASSEMBLY: (No tools required) Step 1 - Attach the Frame Pad to the trampoline Remove all rubber caps on the leg sockets and wrap Frame Pad around the trampoline frame (# 2).
- Page 7 Step 2 -Attach the Legs to the Trampoline Tightly screw the Legs onto the leg sockets (#3) of the trampoline frame. Remove TWO Legs’ Caps (#8) from the front of the trampoline. These will be needed to install the handlebar in the next step.
- Page 8 Step 3 - Assemble Handlebar Lift the trampoline to its standing position. Attach Handrail Legs (#4A and #4B) to the two front legs without the caps, screw a little with Triangle Adjustment Knob (#B), then place Leg Cap (#8) onto the handrail legs.
- Page 9 Step 4 - Assemble Handlebar Support Attach Handrail Support (#6A and #6B) to each side of Handlebar (#5). Triangle Adjustment Knobs (#B) are secured tightly on each side. Connect the assembled handlebar to Handrail Leg Supports (#4A and #4B) and secure tightly with Adjustment Knob (#A) at the appropriate height level.
- Page 10 EXERCISES...
-
Page 11: Care And Maintenance
CARE AND MAINTENANCE FRAME Do not sit or stand on the frame or the frame pads while the trampoline is in use as this restricts the frame’s natural reflex action. If surface rust appears it should be removed with either a wire brush or coarse sandpaper, and the area treated with a non-toxic paint.
Need help?
Do you have a question about the HACIENDA TP200 and is the answer not in the manual?
Questions and answers