Page 2
(Reference: IEC 61340-5-2:1 The C/E series offers many design essential insulators if the paragraph 5.2.9). improvements, most notably, our electrostatic field is considered a patent-pending “Emitter Cassette”...
50607 and 50609 units. The Desco EMIT’s C/E ionizer is designed to mount above the work The C/E series solves this problem. • Stainless steel and powder-coated When the emitters need to be area, providing even coverage aluminum construction for...
Safety interlock switches are panel of the ionizer. In this position, • IEC INPUT CONNECTOR, provided internally on each the balance and fan speed controls based on the International IEC emitter cassette. This ensures that are disabled and the key is 60320 Standard, allows the power to power is cut off in the event that removable.
distinctive blue light. This makes it position. The performance of the cleaning is usually indicated. By readily apparent that the ionizer has ionizer is directly related to the recording the time intervals between its settings locked, preventing airflow on the area to be protected. the first few cleanings, a unauthorized adjustment.
Page 6
supplier of ESDS items) should be • Turn the key switch to the OFF - Adjustment Tool for performed to ensure compliance position. Potentiometers with planned requirements. • Grasp the Replaceable Emitter - Auto-Cal (if Auto-cal is used) Verifications should include routine Cassette ejector levers at the center checks of the Technical and pivot outward about 90...
Page 7
6. See figure 6. For VR (variable 3. Make sure CPA plate is directly Auto-Calibration Unit Adjustment: resistor) locations. Fans from under one of the ionizer's fan. right to left side are labeled 1 to 4. Hold down "+" on the balance 1.
circuits tie them together. If one or Warning! Do not attempt to underneath it and using its more of the individual fan balance calibrate this unit without proper corresponding potentiometer to circuits are offset too much from the equipment such as a charged plate zero its balance.
Limit of Liability In no event will Desco EMIT or any seller be responsible or liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, users shall determine the suitability of the product for their intended use, and users assume all risk and liability whatsoever in connection therewith.
Need help?
Do you have a question about the C/E Series and is the answer not in the manual?
Questions and answers