Download Print this page

Homecare E Series Getting Started

Download this manual

Open Home care Application

Press to start

Select the features that you

would like to access:

instructions on the application.

Health Check-up, E-Health Record,

Emergency Phone Number

MODE

Press the power button.

Choose a temperature

measurement mode.

Point the device to the

Press the power button

forehead within a 3 cm.

again to measure the temperature.

Before taking the measurement,

attain your normal heart rate.

Wrap the cuff around either arm and

tighten the strap so the red tab is on

the elbow.

Place your arm so that the device

is at the same level with your heart.

Then press the blue button at the

bottom to start taking the measurement.

Take off your shoes and socks

Stand on the device

before you start weighing.

to weigh.

Insert the glucose test strip

into the machine. Once the code

appears on the screen,

Need help?

Do you have a question about the E Series and is the answer not in the manual?

Page 1 Before taking the measurement, attain your normal heart rate. Take off your shoes and socks Stand on the device before you start weighing. to weigh. MODE Wrap the cuff around either arm and tighten the strap so the red tab is on Press the power button.
Page 2 Draw blood with a lancet needle and Use one hand to hold the clamp open with touch the end of the test strip with To view health records or history, a drop of blood. The device screen you can tap on the E-Health the other hand into the rubber hole.