VTech Magic Lights 3D Instruction Manual page 5

FEATURES ACTION
Hinge
Volume Buttons
Light Code
Buttons
Play/Pause
Button
Power Button
Lightbox Panel
Sleep Mode
Automatic
Power Off
Open the lightbox at a 90 degree angle for
3D Mode play, to use Picture Mode open the
lightbox to 180 degrees until it lies flat.
Press the - / + buttons to decrease or increase
the volume. There are seven volume levels.
To animate your creations, enter the light
code sets with the four different light code
buttons (circle/triangle/square/star). Entering
the different light code combinations
will present different animations. These
combinations are available in the instruction
booklet and online.
Press the Play/Pause Button to start playing
the last lightshow effect or pause the current
lightshow effect.
Press the Power Button to turn the unit ON.
Press the button again to turn the unit OFF.
Pin the pegs onto the lightbox panels to
create your art.
If there is no input after 3 minutes, the
lightshow animation will then turn off and
enter Sleep Mode, press the Play Button to
replay the lightshow.
If there is no input after 30 minutes, the unit
will turn off automatically. Press the Power
Button again to turn the unit on.
4
4
4