Office Star Products SPACE SEATING 75-77A753 Operating Instructions

FAUTEUIL DE DIRECTION AVEC SIÈGE
ET DOSSIER EN MAILLE RESPIRANTE
ÉTAPE 1 ÉTAPE 2
TEP 2 STEP 3
1
2
X5
ÉTAPE 4 ÉTAPE 5
12
TEP 5
10
X3
4
11
6
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués
sur la liste et vérifier les quantités des pièces.
ÉTAPE 1 Insérer les cinq roulettes (2) dans la base (1). Pousser fermement jusqu'à ce que les roulettes (2) s'encliquettent.
ÉTAPE 2 Fixez les bras (7L & 7R) au coussin de siège (5) en utilisant quatre vis du bras (8) pour chaque bras. SERREZ TOUTES LES VIS AVEC LA CLÉ
ALLEN (12).
ÉTAPE 3 Fixez le mécanisme (4) au coussin du siège (5) avec la flèche vers l'avant de la chaise, fixer le mécanisme (4) à l'aide de quatre vis
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (12).
ÉTAPE 4 Fixer le support du dossier (11) à l'arrière du mécanisme (4) à l'aide trois vis du dossier (10). SERREZ TOUTES LES VIS AVEC LA CLÉ
ALLEN (12).
ÉTAPE 5 Insérer le vérin pneumatique (3) dans la base (1). Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ATTENTION: AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
75-77A753
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
12 12
8 X4
8 X4
7L
5
7R
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Roulettes . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3. Vérin pneumatique . . . . . . . . . . . . . . . . . . .1
4. Mécanisme . . . . . . . . . . . . . . . . . . . . . . . . .1
5. Coussin du siège . . . . . . . . . . . . . . . . . . . . .1
6. Dossier . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
7. Bras (7L et 7R) . . . . . . . . . . . . . . . . . . . . . .2
8. Vis du bras . . . . . . . . . . . . . . . . . . . . . . . . . .8
9. Vis de mécanisme . . . . . . . . . . . . . . . . . . . .4
10. Vis du dossier . . . . . . . . . . . . . . . . . . . . . .3
11. Support du dossier (pre installé) . . . . . . . .1
3
12. Clé Allen . . . . . . . . . . . . . . . . . . . . . . . . . .1
1
9
X4
4
5
5
QTÉ
SPACE LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return freight on components
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 275 lbs.
or less. The 63-37A773HM, 75-7A773, 75-37A773, 75-47A773 and 839-11B35WA are for persons weighing 400 lbs. or less, the 818 & select 829's with self-
adjusting mechanism are 300 lbs. or less and the 15-37A720D is 325 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse,
negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover
cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting
from use of this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
All Space chairs meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
© Office Star Products mars 2021
BREATHABLE MESH
SEAT & BACK MANAGER'S CHAIR
4
3
1
3
1
still in warranty will be paid by Office Star Products.
75-77A753
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1) up. To
lower seat height sit on chair and lift lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• 3 POSITION 2-TO-1 TILT & LOCK ADJUSTMENT
This Deluxe Control allows back to tilt 2 degrees for every 1
degree of seat tilt. Back also locks in 3 positions (Fully back, Mid
& Upright). The back has an anti-kickback which needs pressure
on the back in order to release. To tilt or free float push lever (2)
(on left side of chair) back and lean back. To lock push lever (2)
forward. NOTE: in the Mid and Fully back position you will hear
a click when it is locked. To unlock push lever (2) back and apply
pressure to back. NOTE: anti-kickback keeps chair back from
making unwanted sudden forward movement.
• TILT TENSION ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature. Turn knob (3) clockwise to increase tension and
counter-clockwise to decrease or ease the tension.
NOTE: Be careful not to loosen tilt adjustment knob completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (4) in to allow the arms to move
2
up or down freely. Release the button (4) once the desired height
is reached.
• ARM WIDTH ADJUSTMENT
To adjust arm width, push lever (5) down, adjust arm to desired
width, and lift lever (5) to lock arm into position.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
2
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.