Möbel AS HAT & COAT STAND Technical Sheet

Table of Contents

Download this manual

C O A T

HAT & COAT STAND

Description

A minimalist and expressive coat rack made of six poles held by

a metal ring. Coat can be hung with the notch facing inwards or

outwards – as you prefer. Coat is easy to dismantle to store and to

then unfold again to be placed wherever you need it.

Table of Contents

Do you have a question about the HAT & COAT STAND and is the answer not in the manual?

Page 1 C O A T HAT & COAT STAND DESIGNED BY ULRIK NORDENTOFT Description A minimalist and expressive coat rack made of six poles held by a metal ring. Coat can be hung with the notch facing inwards or outwards – as you prefer. Coat is easy to dismantle to store and to then unfold again to be placed wherever you need it.
Page 2 C O A T HAT & COAT STAND P R O D U C T S H E E T Dimensions Materials Ø 46 cm, H 165 cm (unfolded) Ring: • Satin black • Polished aluminium Weight • Brass 4.5 kg Structure: •...
Page 3 C O A T HAT & COAT STAND I N S T R U C T I O N S F O R R E C Y C L I N G Recyccling instructions Before recycling It is always recommended to reuse or repair before Lift the metal ring upwards to remove it.
Page 4 C O A T HAT & COAT STAND C A R E G U I D E White oiled ash Ring Coat must never be placed next to a heat source, The solid aluminum ring has been polished. The solid and should always avoid extended exposure to black steel ring has been oxidized to give it the satin sunlight.
Page 5 C O A T HAT & COAT STAND C O L O U R O V E R V I E W Poles: Black lacquered ash Poles: Black lacquered ash Poles: Black lacquered ash Ring: Satin black Ring: Brass Ring: Polished aluminium Poles: White oiled ash Poles: White oiled ash Ring: Polished aluminium...