modway EEI-4673 Manual page 2

EEI-4673, 4674 CHAIR
STEP 1:
1. Attach the Front Leg (2) and Back Leg (3) by using 2 pieces of Bolts (A) as shown.
2. Use Allen Wrench (E) to tighten Bolts (A) as shown. Do not fully tighten Bolts (A).
STEP 2:
1. Please put Chair Body (1) upside down on a carpeted or padded surface.
2. Put the assembled Front Leg (2) and Back Leg (3) on the Chair Body (1) as shown.
3. Insert 4 pieces of Bolts (B) with 4 pieces of Spring Washers (C) and 4 pieces of Flat Washers (D) from the
pre-drilled holes on the assembled Front Leg (2) and Back Leg (3) into the Chair Body (1) as shown.
(Note: the wider side is the front of the chair body, the narrower side is the back of the chair body.)
4. Use Allen Wrench (E) to tighten Bolts (B) as shown. Do not fully tighten Bolts (B).
5. When all parts are fixed, please fully tighten all Bolts (A&B).
Customer Service 609-256-9000︱www.modway.com
Page 2 of 3