HP P Class 450/500/550/600/650/700/750 Supplementary Manual page 12

Regulatory Information and Warranty
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name:
Manufacturer's Address:
Declares that the product:
Conforms to the following Product Specifications:
SAFETY
EMC
Supplementary information: The product herewith complies with the requirements of the
following Directives and carries the CE marking accordingly:
the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC both amended by the
Directive 93/68/EEC.
1 The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Grenoble, June1998
For compliance information ONLY, contact:
USA Contact: Hewlett-Packard Company, Corporate Product Regulations Manager, 3000 Hanover Street, Palo Alto, CA
94304. (Tel. (415) 857-1501)
12
HEWLETT-PACKARD
5 Avenue Raymond Chanas
38053 Grenoble Cedex 09
FRANCE
Product Name:HP V
ISUALIZE
Model Number:MT Model
International: IEC 950: 1991+A1+A2+A3 +A4
Europe: EN 60950: 1992+A1+A2+A3 +A4
CISPR 22: 1993 / EN 55022: 1994 Class B
EN 50082-1: 1992
IEC 801-2: 1992 / prEN 55024-2: 1992 - 4 kV CD, 8 kV AD
IEC 801-3: 1984 / prEN 55024-3: 1991 - 3 V/m
IEC 801-4: 1988 / prEN 55024-4: 1992 - 0.5 kV Signal Lines,
IEC 555-2: 1982+A1:1985 / EN 60555-2: 1987
IEC 1000-3-3: 1994 / EN 61000-3-3: 1995
FCC Title 47 CFR, Part 15 Class B
AS / NZ 3548:1992
Jean-Marc JULIA, Product Quality Manager
Personal X-Class Workstation
1
1 kV Power Lines
2
/ ICES-003, Issue 2 / VCCI-2
1
Appendix A