1.
How your solar powered fixture works
During the day, the solar panel converts sunlight into electricity and recharges the battery / batteries. At night, the light turns on
automatically using the electricity stored during that day.
The number of hours the light stays on depends on your geographical location, weather conditions and seasonal sunlight availability.
Place the solar light fixture in an area where it can receive direct sunlight for at least 8 hours each day. Shadowed locations will not allow the
battery / batteries to charge fully and will reduce the hours of nighttime lighting. The selected location should not be near nighttime light sources,
such as porch lights, street lights or pool lights, as these may cause the solar light to turn off prematurely.
2.
First time use
• If the solar panel is covered by a protective film, remove it
before using the product.
• Remove the top cap by turning counter-clockwise
• Slide the switch to either the WH (white) or
CLR (color changing) position
• Replace the top cap by turning clockwise
• Place the solar light in a location where it can receive a
full 8 hours of sunlight to allow the rechargeable battery
to reach maximum capacity.
(includes 2/3 AA 1.2V Ni Mh rechargeable battery)
3.
Fixture assembly
• Attach the bottom post to
the top post section by turning it
clockwise.
• Hang the fixture on the shepherd hook.
READ, FOLLOW AND SAVE THESE INSTRUCTIONS
MODEL #GL42076
Solar panel
Top post
Bottom post
Spike
Solar Powered
Garden Light
5021-GL42076-EN_062519
Need help?
Do you have a question about the GL42076 and is the answer not in the manual?
Questions and answers