Jade J-Bridge Quick Start Manual

Products Purchase
J-Bridge
Bridge + firewall
Defaults for Jade Networks products,
IP : 10.0.100.1, Password : jade
or
Connect a monitor and a keyboard to the device and boot device in
"Reset to defaults" mode and follow the instruction on screen.
Installation process
place J-Bridge device between 2 switches like so. This is the most
common way of installation.
Note : Change the default password as soon as possible.
Minimal requirement for all Jade's software. Windows 2k and up.
Install J-Bridge.exe on your windows computer, follow on screen
installation instructions.
Configs via J-Bridge.exe
Connect the your device, click menu/Tools/Change IP address.
Changing the IP address
click menu/Bridge Config/IP config
Products
Bandwidth controler(JTC)
Bridge+Firewall
Spam Filter
Router+Nat(Gateway)
Device On Demand
Barbwire Firewall
Upcoming
Support
Support
By email
Info
Sales and Quotes
Resellers
Device On Demand
Press
Technical assistance
Quick Start Guide
Changing the Password
click menu/Tools/Change Password
Adding firewall rules
No worry, if entering a rule that will block you from having access
to the device. J-Bridge needs a confirmation to accept the rule. If
for any reason, new rule blocks access, J-Bridge will revert to the
latest working configurations within a minute, giving you back
access to the device.
Contact Us
Jade Networks
253 5e Rue de la Pointe
Shawinigan, Quebec
Canada G9N-1E2
CDN / USA : 1 855 588 3360
World Wide Contacts
User Login
Contact Us
Stay Tuned
Facebook
Twitter