HJC SMART 50B User Manual page 35

7 MESH INTERCOM
Note:
• If the Mesh Grouping is not completed within 30 seconds, users
will hear a voice prompt, "Grouping failed".
• If you want to cancel during the Mesh Grouping, tap the M/F
Button.
7.4.2 Joining an Existing Group Mesh
One of the current users
users (one or more)
Existing
Group Mesh
You
B
C
1. To enter Mesh Grouping to join the Existing Group Mesh, press and
hold the M/F Button for 5 seconds on the headsets of
the current users
and F) in Open Mesh.
Each user simultaneously presses and holds the M/F Button for
5 seconds until
=
M/F
2. When Mesh Grouping is completed, the
hear a voice prompt on their headsets as Open Mesh switches to
Group Mesh.
D F
" Group Mesh"
Note: If the Mesh Grouping is not completed within 30 seconds, the
current user (You) will hear a low tone double beep and the new users
(D and F) will hear a voice prompt, "Grouping failed".
in an Existing Group Mesh can allow
in Open Mesh to join the Existing Group Mesh.
Open Mesh
F
D
in the Existing Group Mesh and the
users hear the voice prompt, "Mesh grouping."
HOLD
5s
SMART HJC 50B 2 Gen Premium Motorcycle Bluetooth
nd
Existing Group Mesh
You
D
B
one (You) of
new users (D
" Mesh grouping"
new users (D and F)
Communication System for HJC Helmets | 35
®
new
F
C
will