Construction And Function; Dimensions And Weight - ZHT AMPHIBIO User Manual

Application
The Floating suction strainer AMPHIBIO is a device used with all most any pumping device
drawing water from an open source. This floating device is designed to receive water directly
from the water surface unlike conventional devices that draw from the bottom of the source
which risks the collection of debris into the pump. This strainer has a Universal positioning
design that allows you to drain wetlands and pump out flooded areas with depths as little as
2cm without the danger of debris entering the pump.
The Amphibio Floating strainer can be used to access just about any open water source.
Construction
The strainer consists of two main parts.
Floating chamber (2) and rotating suction chamber(1). This rotating suction part compensates
the load exerted by the suction hoses so the strainer always floats level and thus becomes self
leveling.
Suction chamber is equipped with a grill (4) and rubber clack valve (6). The clack valve is re-
leased with the aid of a pulling rope (8) connected with a karabiner to the lever (7), which
opens the valve.
With Ergonomic and modern design the strainer is also equipped with a carrying handle (9)
on each side.

Dimensions and weight

Length: 790 mm
Width: 550 mm
Height: 200 mm
Weight: 10 kg
Color: Red floating chamber (2) a grey suction chamber (1)
Material
Floating and suction chambers are made from rotational plastic molding and colored po-
lyethylene block resulting in high resistance to surface damage.
Grid: Polypropylene
Return valve: Rubber
Connection of suction: Aluminum
Features: This floating strainer is used as an auxiliary device for pumps which draws water
from open water surface.

Construction and function

www.zht.cz 15