BGS technic 3213 Instruction Manual

Technical Data

Chisel shank:
Chisel shank length:
Blow per minute:
Working pressure:
Air consumption:
Air Inlet:
Stroke:
Noise:
Vibration:
Weight:
Please read these instructions carefully before use or maintain the air tool described. Keep
instructions for future reference.

Description

This air hammer is designed for cutting through rusted metal or bolts and removing mortar from
cement blocks or bricks.

General Safety

1. This air hammer is a part of a high pressure system. Do not exceed maximum operating pressure
of the air tool (90 PSI – 6,2 BAR). The hammer could explore and result in death or serious injury.
2. Disconnect the air drill from air compressor before changing tools or accessories, servicing and
during non operation.
3. Always ear safety glasses and using hearing protection during operation.
4. Do not wear loose fitting clothing and jewelry which may become caught in moving parts and
result in serious injury.
5. Do not depress trigger when connecting the air hose.
6. Never trigger the tool when not applied to a work object. Accessories must be securely attached.
7. Make sure spring retainer, all connections are secure and check air hoses for weak or worn
condition before each use.
8. WARNING !!! Disconnect air supply before installing or any maintenance notes.
8-piece Air Hammer Kit
Ø 10 mm
133 mm
4500
90PSI
4CFM (90PSI)
1/4" PT
41 mm
LpA: 84 dB (A)
LwA: 95 dB (A)
ahd = 9,4 m/s²
K = 1,5 m/s²
1,1 kg
Art. 3213