Makita GAU01 Instruction Manual page 17

Attaching the hanging band
1. Attach the hooks of the hanging band to the rings
of the shoulder harness or waist belt as shown in the
figure. Select the type of band and the connecting
method appropriate for your usage.
Fig.28
► 1. Ring 2. Hook
Fig.29
► 1. Ring 2. Hook
2. Attach the hook to the tool.
1
Fig.30
► 1. Hook
2
1
2
1
17 ENGLISH
Detaching the tool
When setting down the tool, unlock the buckle on the
hanging band with one hand while holding the tool with
the other hand.
1
Fig.31
► 1. Buckle
NOTE: The buckle is not equipped depending on the
type of band.
If you need to release the tool quickly, follow the steps
below.
1. Push the levers on the buckle of the waist belt to
unlock the buckle.
1
Fig.32
► 1. Buckle 2. Lever
2