GARNI Arcus 165 User Manual

RADIO CONTROLLED CLOCK WITH TEMPERATURE
Model: GARNI 165 Arcus
USER MANUAL
Thank you for purchasing this delicate radio controlled clock with
temperature model GARNI 165 Arcus . Utmost care has gone into
the design and manufacture of the clock. Please read the
instructions carefully according to the version you purchased and
keep the manual well for future reference.
MAIN FEATURES
4
5
12 13
Model: GARNI 165 Arcus
Suchardova 1687/1
702 00 Ostrava
Czech Republic, Europe
www.garnitechnology.com
1 2 3
6 7 8 9 10 11
14 15 16 17 18
19
05G21
1. [ SNOOZE ] key
- Stop the current alarm when it is sounding and enter into snooze
mode.
2. [ REVERSE ] key
- Press it to reverse the projected data.
3. PROJECTOR
- Project the time and indoor temperature.
4. LCD display
5. [ TIME ] key
- Press it to switch between Month/Date and alarm time mode.
- Press and hold it for 2 seconds to enter normal time setting.
- In normal time setting, press it to step the setting mode.
6. [ ALARM ] key
- In normal time display, press it to turn on / off ALM 1 & ALM 2.
- In ALM 1 / ALM 2 mode, press it to turn on / off alarm and pre
alarm function.
- Press it to stop the current alarm when the bell is ringing and
turn off the alarm and snooze function
- In alarm time mode, press and hold it for 2 seconds to enter
alarm time setting.
- In alarm time setting, press it to step the setting mode.
7. [ UP ] key
- In setting mode, press it to increase the setting values.
8. [ 12/24 / DOWN ] key
- In setting mode, press it to decrease the setting values.
- In normal time mode, press it to switch between 12/24 hour format.
9. [ LOOP ] key
- Press the [ LOOP ] key to turn on or turn off the backligh
colour change .
10.[ RAINBOW ] key
- Turn off the LOOP function and press
backlight will change its colour in this sequence: white > red >
orange > yellow > green > cyan > blue > purple.
11.[ TUNE ] key
- Turn off the LOOP function and press
backlight will manually adjust through 256 colours.
12.FOCUS knob
- Adjust the focus of the projected data.
13.[ MAX/MIN ] key
- Press it to check the minimum and maximum temperature
records.
14.[ RCC ] key
- Press it to receive the RC signal for reception testing.
15.°C/°F key
- Press it to switch between Celsius and Fahrenheit.
16.[ RESET ] key
- Press it to reset all values to default values.
- In case of malfunction, the unit may need to be reset.
17.[ OFF / LO / HI ] slide switch
[ HI ]
- Slide to the position for the brighter backlight.
- Slide to the [ LO ] position for the dimmer backlight.
- Slide to [ OFF ] position to turn off backlight function and
projection LED, when press [ SNOOZE ] key, the backlight
and projection will light up for 5 seconds.
18.AC jack
19.Battery door
- Accommodates lithium battery CR2032 for back-up.
POWER UP THE CLOCK
1. Plug the adaptor into the AC jack.
2. Press [ RESET ] key to re-start the clock.
RECEPTION OF RADIO CONTROLLED TIME SIGNAL
The time and date are radio-controlled. The current time and date
are automatically synchronized with the time signal transmitted from
DCF-77 station.
To one-time Stop / Activate RCC signal reception
1. During the RCC reception, press [RCC] button to stop the current
RCC reception.
2. During the normal time mode, press [RCC] button to activate the
RCC reception at once.
1
[ RAINBOW ]
key, the
[ TUNE ] key, the