LG CordZero A9 How To Use page 2

How to use CordZero A9
■ Accessories
Mop Nozzle Mop Nozzle holder
1) Mop pads are consumables and can be purchased from any authorized LG Electronics SVC Center. (Made in China)
■ How to install the floor standing charging station and nozzle holder
Option on some models only
① ②
① Attach the charging station pipe to the charging station
support until a clicking sound occurs.
② Insert the power line to the power line fixing hook at the back
of the charging station pipe to organize the power line.
※ The Mop Nozzle Holder cannot be installed with a Wall
mounted charging station.
③ ④
③ Assemble the Mop nozzle holder on to the charging station pipe from the top to the bottom while organizing the power line.
④ Reassemble the charging station by refitting the top part back onto the stand pipe
⑤ Connect the adapter to the back of the charger and plug the power plug into the outlet.
⑥ Mount the Mop Nozzle to the newly fitted Mop Nozzle holder hook and the battery, crevice tool and 2in1 nozzle to the
charging station and store the mops in the the newly fitted Mop pad cradle
※ After cleaning with the Mop Nozzle wash and dry the mop pads before storing them Otherwise the mop pads may give
off a bad smell.
Precautions before use
• Do allow the Mop Nozzle to vacuum fluids such as water or sharp objects (blades, pieces of glass, wire, etc.) when fitted to
the cleaner. It may cause injury and product malfunction.
• After mopping, remove the mop pads from the mop nozzle, and wash and drying them completely. Storing the mop pads
without drying them may cause floor damage or unpleasant odors from the mop pads as a result. Any remaining water in
the mop nozzle should be emptied out also.
• Do not wash or clean contaminated Mop pads as they may cause damage to the floor. It is best to replace the mop pads to
maintain the best cleaning performance.
• Use only the exclusive mop pads provided with the product upon purchasing. Use of other mop pads may compromise the
cleaning performance.
• Do not trample on the mop nozzle. It may result in product damage.
• If liquid exists on the floor, use the mop nozzle only after removing the liquid with a separate cloth or sponge. Not doing so
can contaminate the Mop nozzle.
• If you intend to clean the same place repeatedly, set STOP for the water adjustment button.
• Do not use the mop to draw liquids from the floor as the liquids will enter the dust canister and pass through the motor and
main body causing unpleasant odors, and damage to those parts.
• Mopping of the same spot repeatedly or for long periods may cause damage to the floor.
※ See the owner's manual for detailed usage and safety information.
※ The mop nozzle is only compatible with CordZero A9.
(LG Electronics will not be held responsible for any defects that may result from using the mop nozzle with a third party device.)
如何使用CordZero A9
■ 附件
地拖吸頭 吸頭收納架
1) 清潔墊屬消耗品，您可透過LG電子客戶服務中心購買。(制造国：中国)
■ 如何安裝充電座及收納架
當您購買A9時
① ②
① 將充電座管安裝到充電座支架，並聽到咔
嚓聲。
② 將電源線藏進充電座管背面的坑道，可收
納得更簡潔。
※ 掛牆安裝時無法使用吸頭收納架。
③ ④
③ 安放電源線同時將吸頭收納架由上而下套進充電座管，擺放時更為簡潔。
④ 將充電座由上而下套在座管上。
⑤ 從背面將電源線插到充電座，並將變壓器插到牆身電源插座。
⑥ 將主機、電池、縫隙吸頭及二合一吸頭安放到充電座，並將地拖吸頭和清潔墊放在收納架上。
※ 清潔墊在使用後請先洗淨並晾乾，否則可能會產生異味。
使用本產品前的一些注意事項
• 請勿使用吸塵機吸入如水等液體或尖銳物體（如刀片、玻璃碎片及電線等）。否則可能會導致人身傷
害和產品故障。
• 請勿將濕的吸頭放在地板上，以免地板受潮而損壞。
• 清潔墊髒污時請勿使用，否則地板可能會變得更髒。
• 本產品僅能使用隨機附送的專用清潔墊。若使用其他清潔墊可能會影響清潔效能。
• 不要踐踏在清潔墊，否則可能會導致產品損壞。
• 若地板上有液體，則請先擦拭液體後才使用地拖吸頭。
• 若重複打掃同一位置，則請將水調節按鈕設置為「STOP」後使用。
※ 有關詳細使用方法及安全信息，請參閱用戶手冊。
※ CordZero A9 與其他清潔器材並不兼容。(對於可能因地拖吸頭與第三
方設備使用上出現的任何損失，LG Electronics 不會承擔任何責任。)
1)
Mop Pads (4) Water filler jug
Attaching the Mop Nozzle Holder
②
①
① Unplug the power plug from the outlet, and then separate the
adapter from the back of the floor standing charging station.
② Separate the charging station by pulling it upwards while
stepping on the charging station support.
※ For safety, it is designed to come off only when it is pulled
with strength.
⑤ ⑥
Storage of the
mop pads
Placing of the
mop nozzle
1)
清潔墊 注水壺
（4 個）
當您購買地拖吸頭時
① ②
① 先將變壓器從牆身電源插座拔除，然後把
充電座背後的電源插頭也一併拔除。
② 踩著充電座支架，將充電座向上拉，以分
離充電座。
※ 基於安全理由，充電座僅在用力拉時才會
分離。
⑥
⑤
存放清潔墊
放置地拖吸頭
How to use CordZero A9
■ How to install the mop pads
① ②
① Wet the mop pads with water ② Squeeze the mop pads sufficiently to
before use. remove the water.
※ Fitting the mop plates upside down or failure to attach the mop plate to the attachment plate properly may compromise
the cleaning performance.
※ If liquid exists on the floor, use the mop nozzle only after removing the liquid with a separate cloth or sponge. Not doing
so can contaminate the Mop nozzle.
※ Do not use the mop to draw liquids from the floor as the liquids will enter the dust canister and pass through the motor
and main body causing unpleasant odors, and damage to those parts
■ How to fill the water
① ②
① Press the PUSH button to ② Open one cap on the side of
separate the water tank. the water tank and fill the
water to the MAX line.
※ Using the water filler jug will make the filling of water easier.
※ Do not put in any liquid other than water.
※ Do not put in hot water.
■ How to adjust the water
Used to clean a moisture-sensitive floor Used to clean ingrained dirt or to supply a
or to supply a little amount of water large amount of water during mopping
※ When purchased, the Water Adjustment button is set to STOP. Press the Water Adjustment button to use water as much
as needed.
※ Set the Water Adjustment button to STOP when not using the product for an extended period of time. Otherwise it may
result in damage to product parts.
※ When you are moving while carrying the mop nozzle or you are cleaning with a dry mop, set the Water Adjustment button
to STOP.
※ If you intend to clean the same place repeatedly, set STOP for the water adjustment button.
※ Mopping of the same spot repeatedly or for long periods may cause damage to the floor.
■ How to dry the water tank
① Open the caps on each side of the water tank and shake the
water tank to remove remaining water.
② After mopping, remove the mop pads from the mop nozzle,
and wash and drying them completely. Storing the mop pads
without drying them may cause floor damage or unpleasant
odors from the mop pads as a result. Any remaining water in
the mop nozzle should be emptied out also.
③ Dry the water tank in a well-ventilated location with no direct sunlight.
※ When cleaning is finished, always empty the water in the water tank. Otherwise the water may be contaminated and give
off a bad smell.
■ When the product emits bad odors
① Empty the dust bin
② Remove any foreign objects from the mop nozzle.
③ Wash exhaust filter and pre-filter, cyclonic mesh filter with running water
and dry thoroughly for over 24 hours in a well-ventilated location.
※ Be sure to remove the mop nozzle from the body after removing the
battery.
※ See the owner's manual for detailed usage and safety information.
※ The mop nozzle is only compatible with CordZero A9.
(LG Electronics will not be held responsible for any defects that may result from using the mop nozzle with a third party device.)
如何使用CordZero A9
■ 如何安裝清潔墊
① ②
① 使用之前用水弄濕清潔墊。 ② 盡量擰乾清潔墊，袪除多
餘水份。
※ 若清潔墊反轉安裝，或未能正確安裝到連接板，清潔效能會受影響。
※ 若地板上有液體，則請先擦拭液體後才使用地拖吸頭。
■ 如何加水
① ②
① 按下「PUSH」按鈕即 ② 打開水箱側面的蓋，
可卸下水箱。 然後加水至水位線
「Max」位置。
※ 使用注水壺加水會更方便。
※ 請勿加入其他液體。
※ 請勿在水箱中加入熱水。
■ 如何調節水量
用於清潔不能過份受潮的地板 清潔頑固污跡或增加水量時
或想要減少用水時使用。
※ 產品在新購時預設為「STOP」停止供水，請根據用量按下供水按鈕。
※ 如果長時間不使用本產品，請將「水量調節」按鈕設為「STOP」。否則，可能會導致故障。
※ 若在吸頭裝上時搬動產品或乾抺地板時，請將水量調節按鈕設為「STOP」。
※ 若重複打掃同一位置，則請將水調節按鈕設置為「STOP」後使用。
■ 如何風乾水箱
① 打開水箱側面的蓋，搖動水箱，清除剩餘的積
水。
② 清潔墊在使用後請先洗淨並晾乾，否則可能會產
生異味。
③ 將水箱放置在通風良好之處晾乾，並避免陽光
直接照射。
※ 清潔過程完成後，必須清空水箱中的積水。否則可能會遭污染並散發異味。
■ 當您聞到產品發出異味
① 請清空集塵箱。
② 清除吸頭上的異物。
③ 用清水清洗排氣過濾器、前導濾網及旋風式濾網，並
放置在通風良好處24小時以上徹底風乾。
※ 必須在取下吸頭及電池後進行。
※ 有關詳細使用方法及安全信息，請參閱用戶手冊。
※ CordZero A9 與其他清潔器材並不兼容。(對於可能因地拖吸頭與第三
方設備使用上出現的任何損失，LG Electronics 不會承擔任何責任。)
③
③ Align the center of the mop pad with
the center of the mop attachment
plate and have the striped side of
the mop pad facing up.
③
③ Insert the 2 bumps in front of the tank and
push until a clicking sound occurs.
Used to stop the supply of water and
dry mop only
① ② ③
Exhaust filter
Pre-
Filter
Cyclonic Mesh Filter
(Cantonese)
③
③ 將清潔墊中心與拖把連接
板的中心對齊，使清潔墊
的條紋面朝上。
③
③ 將水箱2個凸出的卡榫插入吸頭，
並按下水箱直至聽到咔擦聲。
停止供水或乾抺時使用。
使用。
① ② ③
排氣過濾器
前導
濾網
旋風式濾網
MEZ66331061
Rev06_020720
ENGLISH
Click
CHINESE
按下