Table of Contents
Advertisement
4 Adding the Button to the Hub
Before you connect it to the hub, install the DMSS app to your phone. This manual uses iOS as an
example.
● Make sure that the version of the DMSS app is 1.98 or later, and the hub is
V1.001.0000000.7.R.220106 or later.
● Make sure that the hub has a stable internet connection.
● Make sure that the hub is disarmed.
Step 1
Go to the hub screen, and then tap
Step 2
Tap
to scan the QR code at the bottom of the panic button, and then tap Next.
Step 3
Tap Next after the button has been found.
Step 4
Follow the on-screen instructions and switch the button to on, and then tap Next.
Step 5
Wait for the pairing.
Customize the name of the button, and select the area, and then tap Completed.
Step 6
to add the button.
5
User's Manual
Advertisement
Table of Contents
