Chicco Pure Steam Manual page 11

ties, or with insufficient experience or knowledge, un-
less they are under the supervision of a person respon-
sible for their safety, or have been instructed on how to
use the appliance; children should never be left unsu-
pervised to ensure they do not play with the appliance.
Ensure that the plug is disconnected from the mains and
that the appliance is completely cold before carrying out
any cleaning or maintenance operations.
If you have any doubts on the explanations provided in
this instruction manual, please contact your retailer or
Artsana S.p.A..
IV. PREPARING THE PRODUCT
BEFORE FIRST USE:
1) Remove all packaging from the appliance and acces-
sories and check they are all intact (if there is visible
damage or you have any doubts on its integrity, refrain
from using the appliance and/or its components), re-
move the instruction manual, the recipe book and any
additional informative, warning notes that must be
read carefully and kept for future reference.
Attention: all packaging materials must be kept out
of reach of children as they could suffocate (plastic bags)
or swallow small parts.
N.B. IMPORTANT: Before using any new electri-
cal appliances destined to contact with foodstuffs, it is
standard practice and highly recommended to clean the
appliance thoroughly to guarantee maximum levels of
hygiene.
The first time the appliance is switched on, there may
be a slight odour; this is absolutely normal in all electri-
cal goods.
2) Clean the appliance following the instructions below:
a) Insert the steamer basket (7) inside the bowl (8), ap-
ply the transparent lid (6) to close the bowl (8) and
position the bowl in the appliance, as indicated in
paragraph V. USER INSTRUCTIONS
b) Fill the water tank with cold drinking water to its max-
imum level; firmly close the water tank using the cap.
c) Set the cooking time on the display (3) to 30 minutes
and turn the on/off knob to the left to switch the ap-
pliance on.
d) When the cycle has finished, allow the appliance and
water tank to cool down completely, then disconnect
the power cable from the mains and the appliance, re-
move the bowl (8), empty any residual water from the
inside and then wash the bowl, steamer basket and
bowl lid thoroughly using warm water and standard
washing up liquid; carefully rinse and dry all parts and
store them in a clean dry place.
e) Use your finger to close and keep the steam outlet
(13) closed.
f) Fill the water tank up with cold drinking water.
g) Insert and tighten the water tank cap (4) and give the
appliance a quick shake.
h) Remove the water tank cap (4) and, keeping the steam
outlet (13) closed with your finger, pour out all the
water into the sink.
i) Repeat this cleaning cycle again e) - f) - g) – h)
WARNING: Never wash the base (1) or immerse
it in water!
Before performing the cleaning cycle above, check that
all components, except the steamer basket (7) have been
removed from the bowl (8).
V. USER INSTRUCTIONS
THE BOWL
To release and remove the bowl (8) from the base (1):
i: Turn the on/off knob (2) to the central position marked
"0".
Note: For safety reasons, the bowl (8) and lid must only
be removed when the on/off knob (2) is set to "0".
ii. Turn the bowl connector knob (5) counter clockwise
(Diag. C1) and slide the bowl (8) backwards out of its
seat (Diag. A).
To open the transparent bowl lid (6)
i: Lift the transparent lid to remove it from the bowl (6)
To close the transparent bowl lid (6)
i. Insert the lid in the bowl (6) making sure the reference
bars coincide (Diag.B).
To insert the bowl and lid inside the base:
i. Hold the bowl by the handle and lower it all the way
into the base as seen in Diag. A,; check that the bowl is
fitted correctly inside the support base seat.
ii. Turn the connector knob (5) clockwise (Diag. C2) to
block the bowl (8) in place.
WARNING! For safety reasons, the cooking func-
tion mode must never be used if:
1) the steamer basket (7) or baby food jar warm-up bas-
ket (12) have not been placed inside the bowl (8);
2) the bowl (8) has no lid on it (6) or the lid is not posi-
tioned correctly;
3) the bowl (8) is not positioned correctly inside the base
(1)
4) the blade group is fitted inside the bowl (8)
THE BLADE GROUP
To fit the blade group inside the bowl (8):
i: Check that blade protection caps (9B) have been re-
moved from the blade group (9). If this is not the case,
remove them carefully as the blades (9A) are extremely
sharp
ii. Carefully grasp the blade group (9) and place it inside
the bowl (8) making sure it is centred correctly on the
metal rod that protrudes from the bottom of the bowl
(8).
To remove the blade group (9) from the bowl (8):
i. Lift the blade group (9) out of bowl (8).
WARNING!: Always pay attention when handling
the blades (9A) as they are very sharp.
When the blade group (9) is not placed inside the bowl
(8), protect the blades (9A) by replacing the blade pro-
tection caps (9B)
and store the blade group (9) in a safe place, out of the
reach of children.
BEFORE MINCING/CHOPPING/BLENDING FOOD,
ALWAYS CHECK THAT:
- the steamer basket (7), baby food jar warm-up basket
(12) or other accessories have not been placed inside
the bowl (8)
- the blade protection caps (9 B) have been removed
from the blades (9A)
- the blade group (9) is fitted correctly inside the bowl
(8)
- the bowl lid (6) is fitted correctly inside the bowl (8)
- the bowl (8) is correctly connected to the base (1) and
the bowl connector knob (5) is turned to the closed
position (Diag. C2).
HOW TO PREPARE BABY FOOD
HOW TO USE THE COOK CYCLE
The Food Processor PureSteam Cooker steam cooks fruit,
vegetables, meat, fish, rice and all other foods which can
be cooked using this method. Its Intense Steam system
gathers the steam inside the bowl (8); this system pre-
serves the protein and vitamin nutritional values in food
making it the ideal method when cooking food for babies
during the weaning phase. Note: If the water in the tank
runs out, or the set cooking time expires, the cooking
process will automatically switch off.
11