Basalte SENTIDO CRESNET 201 Series Instruction Manual

SENTIDO CRESNET ®
Installation Manual
Safety instructions
Before operating the unit, please read this manual thoroughly and retain it for future reference. Failure to
observe these instructions might damage the device. The device may only be installed and connected by
professional electricians.
All relevant rules and regulations valid in the country of use, as well as Crestron® guidelines, apply.
Description
Sentido Cresnet® is a touch-sensitive keypad compatible with Crestron® home automation system. The Sentido
Cresnet® can be combined with all Sentido and Enzo cover plates, either two-way or four-way. The separate
touch-sensitive surfaces of Sentido each control various functions, using both short and long press. By touching
more than one surface at the same time, additional comfort functions can be activated including room toggle,
scene sequencer and RGB sequencer.
Components
Sentido Cresnet®
Model No. 200-03
1
A
3
A RGB LED
B Temperature sensor
C Touch sensor (1-4)
Important advice
• Never connect the device to 110 V / 230 V.
• Avoid obstacles which might obstruct the proper mounting of the cover to the switch, such as
round headed screws, plastering or textured wall paint.
• Installing a Sentido on a metal wall or a mirror surface might cause the device not to function
properly.
• The minimum gap between 2 Sentido or Deseo must be at least 4 cm (1.6in).
• Do not install any device nearby that might cause interference such as fluorescent lights or RF
devices.
minimum gap = 4 cm (1.6")
B
2
C
4
Sentido front cover 2 way
Model No. 201-xx
(not included)
Sentido front cover 4 way
Model No. 202-xx
(not included)
D
E
D Touch-sensitive surface
E Transparent window
D
E