Table of Contents
Advertisement
Quick Links
G-Force
INSTRUCTION FOR INSTALLATION, OPERATION, AND MAINTENANCE
DANGER
TASK FORCE TIPS LLC
MADE IN USA · tft.com
©Copyright Task Force Tips LLC 2022
Multi-Threat Air Decontamination System
Understand manual before use. Operation of this device without understanding the manual and
receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/
serial-number.
This instruction manual is intended to familiarize installers, end users, and maintenance personnel
with the operation, servicing, and safety procedures associated with this product. This manual
should be kept available to all operating and maintenance personnel.
CrewProtect
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
1
20
TM
800-348-2686 · 219-462-6161 · Fax 219-464-7155
LIC-020 May 5, 2022 Rev00
Advertisement
Table of Contents
Related Manuals for Task Force Tips CrewProtect 20
Summary of Contents for Task Force Tips CrewProtect 20
- Page 1 TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 · 219-462-6161 · Fax 219-464-7155 MADE IN USA · tft.com ©Copyright Task Force Tips LLC 2022 LIC-020 May 5, 2022 Rev00...
- Page 2 6. Failure to follow these guidelines may result in death, burns or other severe injury. Fire and Emergency Manufacturers and Service Association, Inc. PO Box 147, Lynnfield, MA 01940 • www.FEMSA.org © 2020 FEMSA. All Rights Reserved. ©Copyright Task Force Tips LLC 2022 LIC-020 May 5, 2022 Rev00...
- Page 3 NOTICE is used to address practices not related to physical injury. GENERAL INFORMATION The CrewProtect 20 cabin air decontamination system is connected to the vehicle power system to decontaminate the air in the cabin anytime the truck is actively powered. Periodic replacement of cartridges ensures maximum decontamination of harmful particulates, VOCs, viruses, bacteria, and mold.
- Page 4 4. Secure the unit to the bracket by replacing the screws removed in step 2A. 6.1 (155) 5.44 (138) 4X R.100 (2.5) MOUNTING BRACKET COMPLETE UNIT HOLE PLACEMENT OVERALL DIMENSIONS Figure 3.2 ©Copyright Task Force Tips LLC 2022 LIC-020 May 5, 2022 Rev00...
- Page 5 WIRING The CrewProtect 20 is wired to the truck electrical system, allowing continuous decontamination of cabin air while the truck is actively powered. Use the provided wiring diagram to ensure proper wiring. Always disconnect power before installing or servicing electrical components. Failure to do so could cause damage to the circuit boards.
- Page 6 WARRANTY Task Force Tips LLC, 3701 Innovation Way, Valparaiso, Indiana 46383-9327 USA (“TFT”) warrants to the original purchaser of its products (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in material and workmanship during the three (3) year period from the date of purchase.
- Page 7 Push the new cartridge in until the tabs click into place. Figure 6.1 All replacement parts must be obtained from Task Force Tips and its approved dealer network to assure proper performance and operation of the device. DISPOSING OF THE CARTRIDGE The cartridge material is designed to neutralize the toxins captured in the cartridge, rendering them no longer hazardous.
- Page 8 OPERATION AND INSPECTION CHECKLIST BEFORE EACH USE and BEFORE BEING PLACED BACK IN SERVICE, the CrewProtect 20 must be inspected to this checklist: 1. There is no obvious damage such as missing, broken or loose parts, damaged labels, etc.
Need help?
Do you have a question about the CrewProtect 20 and is the answer not in the manual?
Questions and answers