Table of Contents
Advertisement
14
www.electrolux.com
9.7 Door reversibility
1. Remove the ventilation grille. Remove
the upper filling and install it on the
opposite side of the grille.
2. Remove the pedal hole cover and
install the cover provided in the
accessory bag on the opposite side.
3. Lay down the appliance back side
down on a wooden support.
4. Unscrew the hinge (1) and remove the
cover plate (2) and the support (3).
5. Remove the cover (4) on the opposite
side and install the support (3) the
cover plate (2) and the hinge (1). Install
the cover (4) on the opposite side.
1
3
6. Unscrew the lower hinge (1). Move the
pin to the opposite side (2).
7. Unscrew and move the pedal to the
opposite side (3).
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
2
4
3
2
8. Unscrew (1) and move (2) the bracket
to the other side on the door.
2
1
9. Screw on the lower hinge on the
opposite side.
10. Tighten the pin with the adjustment
spanner supplied.
11. Raise the appliance and install the
ventilation grill.
12. Remove the covers on the handles
carefully with a small screwdriver.
13. Unscrew the handle.
14. On the opposite side remove the hole
covers by driving a 3–4 mm drift or
drill into them.
15. Install the handle.
16. Install the covers on the handle.
17. Install the hole covers provided within
the accessory bag.
18. Put the cabinet in position.
1
Advertisement
Table of Contents
