Page 1
T863 User Manual Version: V1.0 Notice: To avoid product loss caused by improper operation, please read the safety information of all operating instructions in this manual before using this product.
PRECAUTIONS ● Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. ● Improper installation will void the manufacturer's warranty. The installation instructions do not apply to all types of vehicles and are written as guidelines to assist in installing the system.
SPECIFICATION 12″ Stream Media Mirror Dash Camera Item Name JOMISE T863 Model 12″ IPS Touch Screen Screen Size Display Resolution 1480 x 320P Front Camera: 1920 x 1080P Recording Resolution In-car Camera: 1920 x 1080P Rear Camera: 1920 x 1080P Front Camera: F1.8 170°...
PACKAGE CONTENTS T863 JOMISE T863 Mirror Dash Cam User Manual x 1 In-car Camera x 1 Front Camera x 1 Rear Camera x 1 Rear Camera Car Charger x 1 Front Camera Cable x 1 Cable (32ft) x 1 Mount Bracket x 1...
INSTALLATION WARNING ● Please MAKE SURE to connect all cameras and wires BEFORE power ON the Mirror Screen, otherwise, the camera cannot work properly. ● Please follow the instructions below for the first-time installation of the Stream Media Mirror Dash Camera. lt is designed to be fitted to the existing rear-view mirror using the straps.
Page 7
INSTALLATION Insert Micro SD Card Notice: ● Use the edge of a small coin ( or similar object ) to push the memory card into slot if required. Take care that the card has clicked into slot, a second push inwards will release the memory card. ●...
Page 8
INSTALLATION Mount the Mirror Dash Cam Step 1: Attach the upper end of the straps to the retaining hooks on the top of the rear-view mirror. Step 2: Extend the straps around the back of the rear-view mirror and attach them to the bottom retaining hooks. Notice: ●...
Page 9
INSTALLATION Front/In-car Camera Installation ▼ Uncover the 3M tape protective film and lens protective film of the front camera and the in-car camera. ▼ Attach the front camera and the in-car camera to a suitable position on the front windshield.
Page 10
INSTALLATION Rear Camera Installation Use the provided double-sided tape or screws to fix rear camera. The angle can be adjusted, so be sure to find a perfect viewing angle for your camera before fix it. ▼ Install inside the car Please choose type 1 bracket to mount the rear camera if you'd like to install it inside your vehicle.
Page 11
INSTALLATION Rear Camera Installation Notice: ● Make the connection first and ensure the machine work well before installing. ● Keep away with the driving operation and the active part of the car. Do not get caught by screws or seat gaps. ●...
Page 12
INSTALLATION Wiring Images Front Camera In-car Camera 3 in 1 Type-C Connector Rear Camera Car Charger GPS Receiver Connect the red trigger wire to the positive of the reversing lamp. NOTICE: The Mini USB interface on the right is used to connect the car charger, and the Type-C interface on the left is used to connect the 3-in-1 connector.
Page 13
INSTALLATION Wire Layout in the Vehicle Step 1: The car charger is connected to the cigar socket. Step 2: Plug the front camera and the in-car camera into the 3-in-1 Type-C connector and install the front camera and the in-car camera at a suitable position on the front windshield.
PRODUCT OVERVIEW Appearance Description Screen GPS Port ① ⑦ Speaker Micro SD Card Slot ② ⑧ Strap Retaining Hooks Power Supply Port ③ ⑨ Power Button ④ ⑩ Front Camera Reset Hole ⑤ In-car Camera ⑥ 3 in 1 Type-C Port Rear Camera...
Page 15
PRODUCT OVERVIEW 12:25 02:36 2021-04-16 Fri ⑩ 0 mph ⑨ Image Switch ① ⑦ Recording Lock / Unlock ② ⑧ Date & Time Settings Speed ③ ⑨ ④ ⑩ File Playback Driving Direction Start / Stop Recording Screen Brightness Adjustment ⑤ Snapshot ⑥...
SETTINGS 12:25 1min Loop Recording 2021-04-16 Fri 1min Sound Record Auto-Rec Event Sycle ● Loop Recording: Set the video recording loop time. - 1 minute - 2 minutes - 3 minutes ● Sound Record: Turn on/off audio recording. ● Auto-Rec: After starting the automatic recording, if there is no interactive operation, it will automatically enter the recording mode.
Page 17
SETTINGS ● Beep: Turn on/off the key voice. ● Mirroring Front View: Turn on/off the mirror view of the front camera. ● Mirroring Rear View: Turn on/off the mirror view of the rear camera. 12:25 Mirroring Room View 2021-04-16 Fri Clock Settings Date &...
Page 18
SETTINGS ● Parking Monitoring: Start the parking guard function (according to the preset G-Sensor sensitivity, the emergency video recording is automatically started after the vehicle is shaken, this function requires a hard-wired kit to be used normally). - Off - High - Middle (Recommend preset levels).
Page 19
SETTINGS 12:25 Time Format 24-Hour 2021-04-16 Fri Reverse Line Reversing Line Correction Reset Setup ● Time Format: Set the 12-Hours/24-Hours time display format according to usage habits. ● Reverse Line: To display the reversing guideline, you need to connect the trigger wire (red wire) at the end of the rearview camera to the positive pole of the reverse lamp.
Page 20
SETTINGS Brightness Adjustmen Touch the pointed area first, a scrollbar will come out, then slide to left or right(+/-)to adjust the brightness.
Page 21
SETTINGS Data Playback To select a video or photo for playback, press the button. Slide to select the desired file form the list and then press the file name to start playback.
Page 22
SETTINGS Review GPS Data with Software [ CAR DVR PLAYER ] By using the file playback software [ CAR DVR PLAYER ], you can record and playback in system with GoogleMap etc., also you can check all drive information such as Time, Location, Speed, and so on. For the first time use, please download the file playback software [ CAR DVR PLAYER ].
TROUBLE SHOOTING ● The power does not turn on Please check that the cigarette power cable is not damaged, and whether the indicator light of the cigar plug is on. ● The power is on but this device can not be turned on When checking that the cigarette plug power supply is right in place, please long press the power button to see whether it is turn on.