Clean the Allergy Filter
(Optional)
1
Turn off the power to the unit.
2
Remove the Micro dust filter from the indoor
unit.
3
Remove the Allergy filter from the indoor
unit.
4
Clean the filter with a vacuum cleaner.
5
Insert the Allergy filter.
6
Assemble the Micro dust filter.
7
Check the side of the front cover for correct
assembly of the Micro dust filter.
NOTE
• The feature and location of Allergy filter may
vary according to the type of model.
Clean the PM1.0 Sensor
1
Open the PM1.0 sensor cover on the side
of the product.
2
Put a little water on a cotton swab, wipe the
lens, and wipe again it with a dry cotton
swab to remove the moisture.
NOTE
• It is applied only for overall cleanliness display
models.
EN
37