Subscribe to Our Youtube Channel
Summary of Contents for Innovative Marine HELIO Universal Controller
- Page 1 H E L I O Universal Controller Read this guide for operation and safety precautions prior to usage. Follow this guide on how to use the controller correctly. www.innovative-marine.com...
-
Page 2: Table Of Contents
Table of Contents Introduction The Innovative Marine HELIO Universal Controller provides aquarium Introduction......................3-4 hobbyists the industry’s premium cutting edge heating temperature control technology with multi-phase redundant safety. Complimented Read Me........................5-6 with a titanium sensor to better regulate and assure overheating does not occur while staying within consistent preset temperature Warnings........................ -
Page 3: Introduction
Safety in redundancy. situations, do not attempt to repair yourself. Return the appliance to Innovative Marine for service or discard the appliance. The two power jacks accommodate up to 1000 watts in total for the If the controller falls into water, DO NOT reach for it! First, unplug it and heating elements that you choose to attach to the controller. -
Page 4: Warnings
Read Me Warnings SAFETY WARNINGS Controller does not come with heating elements nor heater holders. Do not operate remote sensor outside of water. You must follow the manufactures heating element manuals for use and placement. Remote sensor must be cleaned every 30 days or as needed. Always unplug an appliance from the outlet when not in use, before Remote sensor must be placed in an area with good water putting on or taking o parts, and before cleaning. -
Page 5: Parts List
HELIO Universal Controller - Specifications Parts List - HELIO Universal Controller (83000) Set Temperature Aquarium Temperature Power Indicator Element Indicator Line One Element Indicator Line Two (Front View) Mode Button Increase Temperature Decrease Temperature Audible Alarm On Audible Alarm Toggle... -
Page 6: Set Up
Set Up and Installation Set Up and Installation Attaching the Remote Sensor Warning: Controller must be unplugged during attachment and placement of remote sensor and heating element(s). Attach Remote Sensor to Holder Attach sensor to the magnetic holder. Attach the magnetic backing to secure the sensor in your aquarium. -
Page 7: Remote Sensor Placement
Remote Sensor Placement Remote Sensor Placement AIO Placement Sump Placement water line water line Rear view of an AIO Interior view of a sump *Follow Manufacturer guidelines *Follow Manufacturer guidelines for heating element placement for heating element placement... -
Page 8: How To Set Temperature
How to Set Temperature [SET] How to Calibrate Temperature [CAL] Set Desired Temperature Plug in controller to receptacle Calibrate the Sensor Press the Mode button 1 time then the display will read Press the Mode button 2 times then the display will read Calibrate Sensor Temperature Temperature... -
Page 9: How To Set High Alarm
How to Set High Alarm [Hi] How to Set Low Alarm [LOW] Set High Alarm Set Low Alarm Press the Mode button 3 times then the Press the Mode button 4 times then the display will read display will read Set Temperature Set Temperature Set desired high alarm by pressing the “+”... -
Page 10: Error Codes
MANUFACTURERS HEATING ELEMENT GUIDE FOR USAGE AND PLACEMENT. E7 : Remote Sensor Error INNOVATIVE MARINE IS NOT Remote sensor has been detected to be out of water RESPONSIBLE FOR MISUSE, FAILURES, OR or a sudden temperature swing. -
Page 11: Maintenance
30 days or as needed. To Clean the HELIO Unplug the HELIO Universal Controller for at least 1 hour before cleaning. Soak the and sensor in a solution of 1 part vinegar to 1 part water for an hour (or as needed). - Page 12 warranty@innovative-marine.com | 866-368-7941 www.innovative-marine.com...
Need help?
Do you have a question about the HELIO Universal Controller and is the answer not in the manual?
Questions and answers