Aircel AHLD E-Series Installation And Operation Manual page 23

Desiccant Material Safety Data Sheet
Safety data sheet
F200
Revision date : 2008/12/04
Version: 3.0
If on skin:
After contact with skin, wash immediately with plenty of water and soap. Consult a doctor if skin irritation
persists.
If in eyes:
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Immediate
medical attention required.
If swallowed:
No hazards anticipated. If large quantities are ingested, seek medical advice.
5. Fire-fighting measures
Flash point:
Additional information:
Use extinguishing measures to suit surroundings.
Hazards during fire-fighting:
No particular hazards known.
Protective equipment for fire-fighting:
Wear self-contained breathing apparatus and chemical-protective clothing.
NFPA Hazard codes:
Health : 0
6. Accidental release measures
Cleanup:
Vacuum up spilled product. Place into suitable container for disposal.
7. Handling and storage
Handling
General advice:
Avoid dust formation in confined areas. Avoid contact with the skin, eyes and clothing. Ensure adequate
ventilation.
Storage
General advice:
Keep container tightly closed in a cool, well-ventilated place.
Storage stability:
Keep container dry.
8. Exposure controls and personal protection
Components with workplace control parameters
Aluminum oxide (Al2O3),
hydrate
Fire: 0 Reactivity: 1 Special:
OSHA PEL 5 mg/m3 Respirable fraction ; PEL 15 mg/m3 Total
dust ;
ACGIH TWA value 1 mg/m3 Respirable fraction ;
Heatless Regenerative Desiccant Air Dryer
(30286124/MDS_GEN_US/EN)
Non-flammable.
Page: 2/5
23