Do you have a question about the JYX-66BT and is the answer not in the manual?
Questions and answers
Angela
April 28, 2025
How to connect microphone on JYX- 66Bt
1 comments:
Mr. Anderson
May 15, 2025
The JYX-66BT comes with two pre-paired UHF wireless microphones. To use them:
1. Turn on the JYX-66BT speaker. 2. Turn on the wireless microphones by pushing their power switch up. 3. The microphones should automatically connect to the speaker.
If using a regular wired microphone, plug it into the microphone input port on the speaker.
This answer is automatically generated
Lucretia Marie Hudzinski
April 14, 2025
How do I know the jyx 66 pro is charged
1 comments:
Mr. Anderson
April 15, 2025
The document does not provide specific instructions on how to tell if the JYX-66BT is charged. However, it does suggest charging the built-in battery and checking if the adapter is connected securely if the system cannot start up. Therefore, if the device powers on and operates normally after charging, it is likely charged.
Page 1
115.00 mm USER MANUAL MODEL:JYX-66BT 2020-10-24 JYX-66BT说明书 115x160mm 157g铜版...
Page 2
Catalogue Dear users: Thanks for your purchasing.Please read the directions carefully before Introduction..............1 using and follow the correct instructions. Product functions............2-4 Remote control............5-6 Matters needing attention: Wireless microphone............7 To ensure safety, please read carefully and follow the following safety Technical Indicators............8 instructions:...
Page 3
Operation Guide 1.Master: Main volume control knob 2.Number Key: Press to switch to the program with the corresponding serial number MASTER 3.Previous: Short press to switch to the last program; long press to fast backward. 4.Reverb: Adjust reverb. 5.Play/Pause: Short press to play/pause; In radio mode,long press for automatic radio station search;...
Page 4
3.Short press “REC” again to play the recording audio. TWS Function To use this feature,two JYX-66BT systems are required. 1.Turn on the two JYX-66BT and turn them both into Bluetooth mode.Two machines will flash “BLUE” on screen. 2.Long press the “PLAY/PAUSE” button of either of the two machines(Only need to press one button),the other machine will make a prompt tone and stop flashing.
Page 5
Wireless microphone Directions of Remote Control 1.Silent:press to Silent ON,press again to Silent OFF. 2.Mode:Press to switch the system between USB,TF card,Radio Microphone Pickup station,AUX IN and Bluetooth modes. 3.BT:Press to switch to Bluetooth mode in any working state. 4.Play/Pause:When in USB/TF card mode,short press to play/pause the program,long press to repeat.When FM works,short press to silent ON,long press is for searching radio stations.
Page 6
Product Parameters Q:The system can not start up. : Model JYX-65BT A:Charging the built-in battery; Speaker size: 6.5 inch bass + 2 inch treble Check if the adapter is connected securely. RMS: 15W Input voltage: 5V Q:The system provides no sound.
Need help?
Do you have a question about the JYX-66BT and is the answer not in the manual?
Questions and answers
How to connect microphone on JYX- 66Bt
The JYX-66BT comes with two pre-paired UHF wireless microphones. To use them:
1. Turn on the JYX-66BT speaker.
2. Turn on the wireless microphones by pushing their power switch up.
3. The microphones should automatically connect to the speaker.
If using a regular wired microphone, plug it into the microphone input port on the speaker.
This answer is automatically generated
How do I know the jyx 66 pro is charged
The document does not provide specific instructions on how to tell if the JYX-66BT is charged. However, it does suggest charging the built-in battery and checking if the adapter is connected securely if the system cannot start up. Therefore, if the device powers on and operates normally after charging, it is likely charged.
This answer is automatically generated