Alesis BassFire 60 Service Manual page 8

Off mode: OF
PARAM: This parameter modifies the operation of the effect selected for the FX1 module.
4.8 FX2: has 109 Performing modes and one off mode.
Performing modes: U0~U9 UP
Off mode: OF
PARAM: This parameter modifies the operation of the effect selected for the FX2 module.
4.9 FX3: has 141 Performing modes and an off mode.
Performing modes: d0~d9 dP
Off mode: OF
PARAM: This parameter modifies the operation of the effect selected for the FX3 module.
4.10 DIGFX: has 22 Performing modes and an off mode.
Performing modes: d0~d9 dP
Off mode: OF
4.11 LEVE: used for output level control, it has 31 detent position, the display shows Pd0~30.
4.12 ROUTE: has7 Performing modes and 360 degree recircle adjustable range. The display shows 0~7
5. VALUE knob: is a 360 degree encoder. It is used for "functions switch". "Volume adjust" and "store and
confirm".
5.1 function switch: rotate the VALUE knob, the display shows the corresponding function or mode.
5.2 volume adjust: rotate the VALUE knob all the way to the left(so the indicator points to "play"), press and hold
for 1 second, the display shows a number between "0~30" then release, rotate it to the right(clockwise),
S0~S9 SP L0~L9 LP
A0~A9 P0~P9 PU Pd
h0~h9 hP
t0~t9 tP
y0~y9 yP
S0~S9 SP
A0~A9
E0~E9 EP
r0~r9 Rp
n0~n9 nP
o0~o9 Op
G0~G9 GP
t0~t9 Tp
S0~S9 SP
E0.~E9.EP.
H0.~H9.HP
r0.~r9.rP.
u0.~u9.Up
A0.~A9.AP
C0.~C9.CP.
F0.~F9.FP.
L0.~L9.LP
P0.~P9.PU.Pd.
b0~b9 bP