Page 1
BUCKKONVERTER SBC-Buck03 1. ALLGEMEINE INFORMATIONEN Sehr geehrte*r Kunde*in, vielen Dank, dass Sie sich für unser Produkt ent- schieden haben. Im Folgenden zeigen wir Ihnen, was bei der Inbetriebnahme und der Verwendung zu beachten ist. Sollten Sie während der Verwendung unerwartet auf Probleme stoßen, so können Sie uns selbstver-...
2. TECHNISCHE PARAMETER Eingangsspannung 6 - 40 V DC Ausgangsspannung 0 - 32 V DC Ausgangsstrom 0 - 5 A Ausgangsleistung 0 - 160 W Auflösung der 0.01 V Ausgangsspannung Auflösung des 0.001 A Ausgangsstroms Genauigkeit der ± (0,5% +3 Ziffern) Ausgangsspannung Genauigkeit des ±...
Page 3
3. ANSCHLÜSSE IN + Positiver Eingang IN - Negativer Eingang OUT + Positiver Ausgang OUT - Negativer Ausgang Achten Sie beim Anschließen der Eingangsspan- nung darauf, dass es sich um eine Gleichspannung von maximal 40 V handelt. Ansonsten kann es zu Schäden am Gerät kommen.
Page 4
Drücken Sie erneut den SET-Knopf, um die ande- ren Stellen einstellen zu können. Nach 6 Sekunden Inaktivität werden die eingestellten Werte gespei- chert. Anzeige Eingang / Ausgang Wenn der Ausgang ausgeschaltet ist, drücken Sie die Knöpfe -/IN oder +/OUT, um die Anzeige zwi- schen Eingangsspannung und Ausgangsspannung zu wechseln.
SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn Möglichkeit Rückgabe in Ihrer Nähe: Wir senden Ihnen eine Paketmarke zu mit der Sie das Gerät kostenlos an uns zurücksenden können. Hierzu wenden Sie sich bitte per E-Mail an Service@joy-it.net oder per Telefon an uns.
Page 6
Fragen offen bleiben oder Probleme auftauchen stehen wir Ihnen auch per E- Mail, Telefon und Ticket-Supportsystem zur Seite. E-Mail: service@joy-it.net Ticket-System: http://support.joy-it.net Telefon: +49 (0)2845 9360 – 50 (10 - 17 Uhr) Für weitere Informationen besuchen Sie unsere Website: www.joy-it.net Veröffentlicht: 23.02.2022...
BUCK CONVERTER SBC-Buck03 1. GENERAL INFORMATION Dear customer, thank you very much for choosing our product. In the following, we will introduce you to what to observe while starting up and using this product. Should you encounter any unexpected problems...
2. TECHNICAL PARAMETERS Input voltage 6 - 40 V DC Output voltage 0 - 32 V DC Output current 0 - 5 A Output power 0 - 160 W Output voltage 0.01 V resolution Output current 0.001 A resolution Output voltage ±...
Page 9
3. CONNECTIONS IN + Positive input IN - Negative input OUT + Positive output OUT - Negative output When connecting the input voltage, make sure that it is a DC voltage of 40 V maximum. Otherwise, damage to the device may occur. 4.
Page 10
Display input / output When the output is off, press the -/IN or +/OUT buttons to toggle the display between input volta- ge and output voltage. When input voltage is displayed, the "IN" LED will light up, when output voltage is displayed, the "IN" LED will not light up. CC and CV When the module outputs a constant voltage (CV) or constant current (CC), the CC or CV LED will...
SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn, Germany Possibility of return in your area: We will send you a parcel stamp with which you can return the device to us free of charge. Please contact us by email at Service@joy-it.net or by telephone.
Page 12
If there are still any issues pending or problems arising after your purchase, we will support you by e-mail, telephone and with our ticket support system. Email: service@joy-it.net Ticket system: http://support.joy-it.net Telephone: +49 (0)2845 9360-50 (10-17 o‘clock) For further information please visit our website: www.joy-it.net Published: 23.02.2022 www.joy-it.net...
Need help?
Do you have a question about the SBC-Buck03 and is the answer not in the manual?
Questions and answers