Canon S530D Quick Start Manual page 50

48
Adjusting the Contrast
1
Check that the printer is on.
2
Insert a memory card to which JPEG
data has been saved (see page 29).
3
Press the Maintenance button.
The
Sheets.
4
Press the
The
5
Press the Print button.
The
Image.
6
Adjust the contrast by using the
(left) and
You can adjust the contrast within the following
setting range by operating the buttons. The base
setting is 0.
: As the number increases in the negative
direction, the contrast becomes deeper
(-1 to -9).
: As the number increases in the positive
direction, the contrast becomes lighter
(1 to 9).
7
Press the Print button.
The data is displayed in the viewer with the
contrast that was set.
To exit Maintenance mode, press the Maintenance
button.
icon appears in Required
(right) button six times.
icon appears.
icon appears in Optimize
(right) buttons.