Related Manuals for ACASIS M03
Summary of Contents for ACASIS M03
- Page 2 Compatible with PCl-e NVMe M.2 M key & B+M key SSDs NOT COMPATIBLE with M.2 SATA/AHCI SSDS Read and write both SSDs simultaneously Support data transmission speed of up to 10Gbps Offline cloning without using computer Full aluminum case for maximum heat dissipation 100% tool-free design Support Windows 7 or later/ Mac OS 10.5 or later / Linux Kernel 2.4 or later...
- Page 3 Target>Source Source For Example: Source Target Note: Please make sure the capacity of the target SSD is larger than the source SSD, otherwise the clone function will not work. Before cloning, disconnect the USB cable from the device. Put the source SSD in Slot A and target SSD in Slot B. Connect the power adapter to the enclosure.
- Page 4 Plug the SSDs into the slot Connect the power adapter Connect the USB data cable with the computer Press the power button and start to use Do not install any disks while the device is powered on or connected computer.
- Page 5 Q: Why does my new cloned drive not show up? A: It mainly happens in Windows OS The target drive goes offline happens because of signature collision between the source and target drive(they are exactly same as each other after cloned). Solutions: For Windows 7 or later: 1) Right-click This PC ->...
- Page 6 A:If the capacity of target drive is bigger than the source drive, the remaining space of the drive will be left as unallocated space. Q:How can I make unallocated space available for data storage? After-sales: support@acasis.com Website: https://www.acasis.com Facebook Page: https://www.facebook.com/Acasis.support Acasis Club: https://www.facebook.com/groups/acasis...