agui OKATT DNP16-01 Manual For Installation And Use

DNP16-01
By: E. Irazu.
Reviewed by: J. Fernández
1) INTRODUCTION
The purpose of this Manual is to describe the steps for the correct installation and use of the vertical buffer
support.
2) WARRANTY
In order to understand and handle this product, you must be legally qualified to install elevators.
AGUI accepts liability, where applicable, for the products included in the shipment. The AGUI warranty may
be rendered invalid if parts or components other than those described in these instructions are fitted.
AGUI cannot accept liability for any damage caused by incorrect handling or as the result of action other than
that indicated in this manual. The product guarantee may be rendered invalid if used incorrectly or
inappropriately.
All current regulations in force for elevator safety have been observed during the manufacture of this
product. There may be risks posed to those handling or fitting the product.
It is not permitted, except where explicitly authorised:

To use components other than those installed;

To modify the product in any way;

To install the product for a purpose other than that for which it is intended;

To destroy any seal;

To perform faulty or insufficient inspections and maintenance;

To use accessories, parts or materials not supplied by AGUI, or that are not official AGUI parts.
MANUAL FOR INSTALLATION AND USE
DNP16-01. PIVOTING BUFFER SUPPORT
BRAND PRODUCT
DEPARTMENT
Rev:2
1