Canon PowerShot SX260 HS User Manual page 170

Image Categories
Choosing Images Individually
• Images will not be assigned to a category if you switch to Shooting
mode or turn the camera off before finishing the setup process in step
4.
170
Choose [Select].
Following step 2 on p. 169, choose [Select]
and press the m button.
Choose an image.
Press the qr buttons or turn the 5 dial to
choose an image.
Choose a category.
Press the op buttons to choose a category,
and then press the m button.
displayed.
To cancel selection, press the m button
again. is no longer displayed.
Repeat this process to choose additional
images.
Finish the setup process.
Press the n button. A confirmation
message is displayed. Press the qr buttons
or turn the 5 dial to choose [OK], and then
press the m button.
is