Note It is suggested to read the full user guide before using your K A P 7 0 6 0 0 Wireless Charger. An electronic version of this document is available on our website at www.kapsys.com under the Support section.
Getting started 1. Connect one end of USB cable on the Wireless Charger (Type C) and connect the other end on a USB DC power supply (5 Volts). 2. The wireless charger works with most slim protective cases (less than 3mm thick). If the case is heavy duty, made of metal, or your case doubles as a wallet and holds metal cards, charging may not properly function and the case would need to be removed.
Legal notice and Warranty PRECAUTIONS FOR USE AND RECOMMENDATIONS Read all information before using the device to ensure safe and proper use. • Handle your product with care, do not drop or knock them • Do not disassemble the product as this will void the warranty and may cause damage that may render the product unusable.
KAPSYS cannot be held liable in the event of any technical or publishing errors or omissions contained herein, or in the event of accidental or indirect loss or damage resulting from the product operation or from using this document.