Forgeon GENERAL Instruction Manual page 4

SETUP
EN
Installation with 2.4Ghz wireless receiver
To use General with 2.4Ghz wireless mode, simply insert the USB receiver into the PC and
press and hold the power button until the wizard message "POWER ON" sounds.
It will automatically perform the pairing process and once connected you will hear the wizard
message "CONNECTED".
Installation with 3.5mm jack cable
Plug the 3.5mm cable into the headphones and the other end into the desired device.
Installation with Bluetooth
To start the pairing process, press and hold the power button for 3 seconds until the power
LED quickly changes from blue to red, indicating that the pairing process has started.
Look for the name of the device in the list of available devices that will appear on your PC/
smartphone/compatible console and select it. Once connected, the wizard will indicate the
"CONNECTED" status verifying that it is connected.