Advertisement
Advertisement
Table of Contents
Summary of Contents for Cornell CFC-E300TB
- Page 1 Chopper CFC-E300TB...
- Page 2 General Safety Precautions 1. The appliance should be used strictly in accordance with these instructions. No liability can be accepted for any damage caused by non-compliance with these instructions, or any other improper use or mishandling. 2. Always unplug the appliance from the Mains electrical supply outlet before cleaning it or when not in use.
- Page 3 Parts Identification Specifications Model No. CFC-E300TB Rated Voltage 220-240V~ Rated Wattage 300W Frequency 50/60Hz...
- Page 4 How to use Your Chopper 1. Chopper Place the chopper cup on a dry and level horizontal surface. Put the chopping blades into the chopper cup. (Note: Do not use blender). Put the meat (cut into small pieces with 10-20mm thickness, without bone and muscle) into the chopping cup (the volume of food should not be more than 300g) and then close the chopper cover with the base connection.
- Page 5 When the food has been cut into desired pieces, turn off the unit. Wait until the motor has stopped running before removing the food out of the cup. Note : The motor is equipped with a protective setting which will turn off the unit automatically when the motor is over heated.
- Page 6 Care and Cleaning 1. Switch the appliance off and remove the plug from the wall socket. 2. Do not use abrasive creams, steel wool or scouring pads. 3. Clean the appliance with dish washer detergent and wipe with dry cloth. Store it in dry and cool place. WARNING: THE CHOPPER BLADES ARE SHARP.
Need help?
Do you have a question about the CFC-E300TB and is the answer not in the manual?
Questions and answers