Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for SCA PLU 284935
- Page 2 WARRANTY This product is guaranteed against defects for a period of 12 months from date of purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Supercheap Auto) of 751 Gympie Rd Lawnton QLD 4501 Ph (07) 3482 7500. Supercheap Auto will offer a repair, replacement product or store credit if the product is assessed as being defective during the warranty period.
- Page 3 SPECIFICATIONS PARTS LIST IMPORTANT SAFETY INFORMATION Max Capacity: 680kg Description Qty. READ ALL SAFETY WARNINGS BEFORE OPERATION! Baze Size: 79 x 37cm Caster Assembly FAILURE TO OBEY THESE WARNINGS MAY RESULT IN LOSS OF LOAD, DAMAGE Minimum Lift Height: 11cm TO JACK AND OR JACK FAILURE RESULTING IN PERSONAL INJURY OR Lock Pawl PROPERTY DAMAGE.
- Page 4 Mounting Vehicle On Lift The SCA ATV LIFT requires some assembly. The below steps are to be 1. Lower the Jack completely. This should allow you to followed to ensure that this assembly has been carried out correctly. easily roll it under the vehicle. Note: Read your vehicle Owner’s Manual to determine the...
- Page 5 Never work on the vehicle, or leave unattended if the lock pawl is not in place, and if sufficient tie down straps are not holding the vehicle firmly in place. 1. Visual inspections should be made before each use of the jack by checking for abnormal conditions such as cracked wheels, leaks and damaged, loose or missing parts.
- Page 6 1. Before using the ATV lift, read and understand all warnings, assembly and operational instructions. 2. Do not overload the lift beyond the rated capacity. 3. Inspect the lift before every use. 4. Use only on hard, flat surfaces. 5. After the vehicle has been lifted to the desired height, ensure that the locking arm mechanism is engaged.
Need help?
Do you have a question about the PLU 284935 and is the answer not in the manual?
Questions and answers