Advertisement
Quick Links
Galvanised Steel Garden/Outdoor/
Storage Shed 1.51 x 1.51 x 2m Pent
Roof, Green
Model No. DG114
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will,
if used according to these instructions, and properly maintained, give you years of trouble free performance.
www.dellonda.co.uk
DG114 Issue:2 13/05/21
Advertisement
Related Manuals for dellonda DG114
Summary of Contents for dellonda DG114
- Page 1 Storage Shed 1.51 x 1.51 x 2m Pent Roof, Green Model No. DG114 Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. www.dellonda.co.uk...
-
Page 2: About The Product
Galvanized steel panels easily assembled to form rigid and secure structure, Doors are secured by cross bolt and eyelet which will accept a padlock (not included) for additional security. All models are supplied with bolt down fixing kits. • SPECIFICATION • Model no: .......... DG114 • Width: ..........1510mm • Depth: ..........1510mm •... - Page 3 F52 reinforcing mesh. We recommend that you make your slab approximately 100mm bigger than the base dimensions of your shed. This will allow for a 50mm edge around your shed. We recommend that you slope the 50mm edges downward by 10mm so that rain water can drain away from your shed. www.dellonda.co.uk...
- Page 4 www.dellonda.co.uk...
- Page 5 www.dellonda.co.uk...
- Page 6 www.dellonda.co.uk...
- Page 7 www.dellonda.co.uk...
- Page 8 www.dellonda.co.uk...
- Page 9 www.dellonda.co.uk...
- Page 10 www.dellonda.co.uk...
- Page 11 www.dellonda.co.uk...
- Page 12 www.dellonda.co.uk...
- Page 13 www.dellonda.co.uk...
- Page 14 www.dellonda.co.uk...
- Page 15 www.dellonda.co.uk...
- Page 16 ROOF TOP EDGE RIDGES FACING UP Note: Fix rivets FIX WITH 3.0MM RIVETS FIXW ITH3 .0*10MMR IVET through the front panel with ridges facing up. RIDGES FACING DOWN WHITE PLASTIC STOPPER WHITEP LASTIC STOPPER WHITE PLASTIC WHITEP LASTIC STOPPER STOPPER www.dellonda.co.uk...
- Page 17 www.dellonda.co.uk...
- Page 18 www.dellonda.co.uk...
- Page 19 Now fit the bolt down kit as per the diagram. Strengthen the mid wall braces by applying part 72 (mid wall brace bracket) to each corner if necessary. WALL SHEET BOLT & NUT BOLT & NUT WALL SHEET STEEL ANGLE STEELA NGLE SLAB SLEEVE ANCHOR BOLT SLEEVEA NCHORB OLT DOOR DOOR www.dellonda.co.uk...
- Page 20 Apply channel safety cover (L type) to part 31 (channel) and channel safety cover (R type) to part 33R (channel). Also apply the self-tapper covers to screw ends visible in the walls on the inside of the shed as per the diagram below. www.dellonda.co.uk...
- Page 21 If you are concerned about the visibility of any pre- drilled holes, you can fill them with rivets. Perform the same procedure for the pad bolt. www.dellonda.co.uk...
- Page 22 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Dellonda Limited Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757575 support@dellonda.co.uk...
Need help?
Do you have a question about the DG114 and is the answer not in the manual?
Questions and answers