Advertisement
Battery Expansion Cabinet Installation – batteries #5 to #8
The DURACELL POWER CENTER 5 kW system supports up to two additional expansion cabinets. Where duplicated, the mechanical assembly
and wiring instructions will be referenced to previous sections within this document. All instructions specific to the first expansion cabinet are
documented below, with battery modules numbered 5 to 8 inclusively. Startup and operation, section 8, remains unchanged.
A.1 Initial Inspection of Material List – top level system components
The system components supplied with your DURACELL POWER CENTER 5 kW are shown below. Each component should be inspected visually
for any damage that may have been caused by shipment. If damage is present, please contact your local distributor.
Item
DURACELL P/N
1
D-14kWh-LFP
2
-
3
US3000C
4
D-14kWh-LFP
1
Figure 1: Expansion battery top level components.
2.6.1 LFP expansion install kit – mechanical parts
Item
Qty
DURACELL P/N
1
1
D-14kWh-LFP kit
2
8
3
1
D-14kWh-LFP kit
1
Figure 2: LFP expansion install kit - mechanical parts.
Description
Battery Cabinet (and cover)
Expansion wall mount bracket
4 battery modules
Assembly parts kit and cables
Description
Incl. cabinet coupler assembly, two levelling brackets, and two plugs
Adhesive backed battery module pads
Battery rack partition bracket (includes attached battery retaining clip)
M4 x 25 mm
2
3
4
3
8x
3
4
Advertisement
