Subscribe to Our Youtube Channel
Related Manuals for Homebase NAOMI
Summary of Contents for Homebase NAOMI
- Page 1 NAOMI TABLE LAMP INSTRUCTION MANUAL IMPORTANT: Please read these instructions before using the product and retain for future use. HHGL Limited, MK9 1BA HHGL (ROI) Limited, D02 X576...
- Page 2 SAFETY AND CARE ADVICE • For your safety, this product must be installed in accordance with local building regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority. •...
- Page 3 Step 1 Remove the shade ring from the lamp holder. Step 2 1. Place the glass shade over the lamp holder. 2. Re-screw the shade ring to secure glass shade in place.
- Page 4 Step 3 Screw the bulb (not supplied) into the lamp holder, making sure you don’t exceed the bulb wattage stated on the product. Step 4 1. Remove the plug cap and insert the plug into a normal household socket. 2. Using the in-line switch, switch on and test the fitting.
Need help?
Do you have a question about the NAOMI and is the answer not in the manual?
Questions and answers